![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#8 |
Senior Member
![]() Join Date: Mar 2011
Location: Tucson, Arizona
Posts: 2,071
|
Re: Order of Operations - Cab repair/sandblast
I repaired most of my cab before blasting. I then blasted the entire cab ..and epoxy primed. The fenders, hood, and other parts were blasted and then patched and epoxy primed. I use crushed glass as my blasting media. On large panels, I stripped by hand. I still have the doors to do. I will cut out the rust on the bottoms and then before patching I will blast the insides of the doors, then epoxy prime the inside of the doors before patching the bottom.
__________________
Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing. ![]() |
![]() |
![]() |
Bookmarks |
Tags |
cab, rust repair, sandblast |
|
|