Another one underway! Meet project Savannah - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CC69Rat** · 10-02-2020, 11:54 AM

I have been out of the loop for a few years, just going through some stuff but I wanted to share a new project Dad and I are working on. I am looking forward to reconnect with some old friends.

We went down to Savannah GA (Vidalia GA) and picked this one up Monday. 67 SWB, original stepside truck. 6cyl, 3ott. One owner, original title and sales invoice. It is probably the cleanest most rust free 67 I have ever seen. I have had a bunch of these trucks and it's uncommon to see an original rocker / cab corner 67 cab for sure. The paint isnt perfect but I will be repainting it anyway. I just bought it because it's so solid. Nothing special truck, very few options but it runs like a sewing machine.

The 90s bed is going to be replaced with a 67 Short fleet wood floor. 5/7 static drop of some sort, 4 wheel discs, Built 6.0LS and 4L80 combo. Stay tuned ! It should be interesting.

1stchevy · 10-02-2020, 04:16 PM

Sweet truck and I like the plan. Should be another nice build by you guys.

cornerstone · 10-02-2020, 09:55 PM

Glad to see another high potential build coming! It's been a bit slow here lately, and that's partially my fault too.

**Ol Blue K20** · 10-04-2020, 08:27 AM

Subbed to watch!

**Getter-Done** · 10-04-2020, 09:13 AM

I am in for the build.

.

**SIXTY9** · 10-04-2020, 09:51 AM

Glad to see you and Pops back at it.
Wally

NoNeck · 10-20-2020, 12:18 AM

Chad and I were able to get the 90's model bed off and begin the process of cleaning 50 years of south Georgia sand from the frame.

Next step is lowering the rear, C-Notch the frame and add an adjustable track bar and performance shocks. Axles will be swapped out for new 5 lug versions and rear Disc Brakes.

A Boyd's Welding EFI tank is being fabricated and should arrive by the end of the month. The ACC medium blue loop high hump carpet came today and looks great.

One step at a time.

POP

FRCvette · 10-21-2020, 10:49 PM

Great to see you back on here. I followed your previous build and will be following along on this one.

**Getter-Done** · 10-21-2020, 10:59 PM

Quote:

Originally Posted by NoNeck

Chad and I were able to get the 90's model bed off and begin the process of cleaning 50 years of south Georgia sand from the frame.

Next step is lowering the rear, C-Notch the frame and add an adjustable track bar and performance shocks. Axles will be swapped out for new 5 lug versions and rear Disc Brakes.

A Boyd's Welding EFI tank is being fabricated and should arrive by the end of the month. The ACC medium blue loop high hump carpet came today and looks great.

One step at a time.

POP

Great idea on the bed lift

Ingenewity and Top Level planning

Yeah I had to look up how to spell that word

.

NoNeck · 10-22-2020, 10:45 AM

We are trying to build a nice all GM short bed with a wooden floor made form exotic African Mahogany. In our search for factory wood bed panels we found this super solid wood bed long wheel base.

The truck bed had been protected by a camper cover since 1970. The inside of the bed is amazing! The wheel tubs have just a few scratches and zero rust at the mounting flanges. The header panel is straight as an arrow and with no dents or rust. The rear bed sill and cross sills are perfect.

We will be using everything except the bed sides to build the short bed. We are still looking for nice GM swb bedsides.

POP

NoNeck · 11-01-2020, 04:47 PM

We picked up a few things last week for the '67. A local C10 hoarder friend had a quick ratio power steering box for a '71 Cheyenne Super, tail light housings, nice GM seat belts, NOS Trico wiper blades and tail gate trunnions.
We got em all cleaned up and ready to go on the truck after it's painted.

POP

NoNeck · 11-01-2020, 04:52 PM

The Boyd's Welding Tank finally arrived. It comes complete with fuel pump, mounting kit and fuel sending unit and is ready to drop in and go.

The tank is too nice to cover with a wood bed and the quality is amazing!

POP

NoNeck · 11-01-2020, 04:56 PM

My C10 hoarder friend also welded up his version of a super strong set of C Notches. They weigh a ton, but will be perfect for our drop.

POP

NoNeck · 11-05-2020, 07:46 PM

We got a complete drop out, 42k mile 6.0L LS engine and 4L80e home and now begins the process of doing a transplant on the '67. Chad will be changing to a Trailblazer SS intake, a hotter BTR cam and a set of 243 heads. The 317 heads are good heads, but the 243's flow much better.

Parts are being collected and plans are being made, so stay tuned!

POP

NoNeck · 11-13-2020, 04:34 PM

The interior in Chad's truck is super nice. We will be changing the seat cover to a Cheyenne scroll pattern and new carpet. Plus, a high hump to give a little more clearance for that 4L80.

POP

TA_C10 · 11-14-2020, 11:19 PM

Subbed

**nlped** · 11-15-2020, 12:14 AM

I’m in

**zicc1835** · 11-22-2020, 07:59 PM

Im setting my dial to this station tooo

68Gold/white · 11-23-2020, 01:40 PM

Take ya'lls time. We need another good read!!!

72 tigger · 11-24-2020, 01:23 AM

Riding along

68cajun · 11-24-2020, 04:18 PM

I’ll follow along also

NoNeck · 01-12-2021, 12:39 AM

Our Moser 5 lug axles came in today. We have used them in a bunch of trucks and they really work nice. Also assembled the new tail light lenses on the restored housings with new gaskets, bulbs and stainless screws.

Now to snag a rear end cover gasket and some Redline Differential Oil for the axle update.

POP

**MDPotter** · 01-12-2021, 02:42 PM

Looks like an excellent foundation for your build! How did you find a Gen III LS with only 42k miles on it???

NoNeck · 01-12-2021, 08:25 PM

Quote:

Looks like an excellent foundation for your build! How did you find a Gen III LS with only 42k miles on it???

My son Chad searched the whole East Coast for a nice low mileage 6.0.I'm sure he will chime in and tell you more about it.

POP

FRCvette · 01-12-2021, 08:59 PM

Quote:

Originally Posted by MDPotter

Looks like an excellent foundation for your build! How did you find a Gen III LS with only 42k miles on it???

They are out there. I found one complete with trans with 39,000 miles for three grand. Had to drive nine hours to pick it up.

10-02-2020, 11:54 AM	#1
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Another one underway! Meet project Savannah I have been out of the loop for a few years, just going through some stuff but I wanted to share a new project Dad and I are working on. I am looking forward to reconnect with some old friends. We went down to Savannah GA (Vidalia GA) and picked this one up Monday. 67 SWB, original stepside truck. 6cyl, 3ott. One owner, original title and sales invoice. It is probably the cleanest most rust free 67 I have ever seen. I have had a bunch of these trucks and it's uncommon to see an original rocker / cab corner 67 cab for sure. The paint isnt perfect but I will be repainting it anyway. I just bought it because it's so solid. Nothing special truck, very few options but it runs like a sewing machine. The 90s bed is going to be replaced with a 67 Short fleet wood floor. 5/7 static drop of some sort, 4 wheel discs, Built 6.0LS and 4L80 combo. Stay tuned ! It should be interesting. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-02-2020, 04:16 PM	#2
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Another one underway! Meet project Savannah Sweet truck and I like the plan. Should be another nice build by you guys.

10-02-2020, 09:55 PM	#3
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: Another one underway! Meet project Savannah Glad to see another high potential build coming! It's been a bit slow here lately, and that's partially my fault too. __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.

10-04-2020, 08:27 AM	#4
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Another one underway! Meet project Savannah Subbed to watch! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

10-04-2020, 09:13 AM	#5
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,429	Re: Another one underway! Meet project Savannah I am in for the build. . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

10-04-2020, 09:51 AM	#6
SIXTY9 Senior Member Join Date: Jan 2013 Location: North Charleston SC Posts: 504	Re: Another one underway! Meet project Savannah Glad to see you and Pops back at it. Wally

10-20-2020, 12:18 AM	#7
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah Chad and I were able to get the 90's model bed off and begin the process of cleaning 50 years of south Georgia sand from the frame. Next step is lowering the rear, C-Notch the frame and add an adjustable track bar and performance shocks. Axles will be swapped out for new 5 lug versions and rear Disc Brakes. A Boyd's Welding EFI tank is being fabricated and should arrive by the end of the month. The ACC medium blue loop high hump carpet came today and looks great. One step at a time. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

10-21-2020, 10:49 PM	#8
FRCvette Registered User Join Date: Mar 2007 Location: cincy Posts: 694	Re: Another one underway! Meet project Savannah Great to see you back on here. I followed your previous build and will be following along on this one. __________________ There's something women like about a pick-up man 1967 c10 swb Stepside 2004 SSR 2013 Silverado swb

10-22-2020, 10:45 AM	#10
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah We are trying to build a nice all GM short bed with a wooden floor made form exotic African Mahogany. In our search for factory wood bed panels we found this super solid wood bed long wheel base. The truck bed had been protected by a camper cover since 1970. The inside of the bed is amazing! The wheel tubs have just a few scratches and zero rust at the mounting flanges. The header panel is straight as an arrow and with no dents or rust. The rear bed sill and cross sills are perfect. We will be using everything except the bed sides to build the short bed. We are still looking for nice GM swb bedsides. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-01-2020, 04:47 PM	#11
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah We picked up a few things last week for the '67. A local C10 hoarder friend had a quick ratio power steering box for a '71 Cheyenne Super, tail light housings, nice GM seat belts, NOS Trico wiper blades and tail gate trunnions. We got em all cleaned up and ready to go on the truck after it's painted. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-01-2020, 04:52 PM	#12
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah The Boyd's Welding Tank finally arrived. It comes complete with fuel pump, mounting kit and fuel sending unit and is ready to drop in and go. The tank is too nice to cover with a wood bed and the quality is amazing! POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-01-2020, 04:56 PM	#13
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah My C10 hoarder friend also welded up his version of a super strong set of C Notches. They weigh a ton, but will be perfect for our drop. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-05-2020, 07:46 PM	#14
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah We got a complete drop out, 42k mile 6.0L LS engine and 4L80e home and now begins the process of doing a transplant on the '67. Chad will be changing to a Trailblazer SS intake, a hotter BTR cam and a set of 243 heads. The 317 heads are good heads, but the 243's flow much better. Parts are being collected and plans are being made, so stay tuned! POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-13-2020, 04:34 PM	#15
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah The interior in Chad's truck is super nice. We will be changing the seat cover to a Cheyenne scroll pattern and new carpet. Plus, a high hump to give a little more clearance for that 4L80. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

11-14-2020, 11:19 PM	#16
TA_C10 Registered User Join Date: Jun 2018 Location: Texas Posts: 1,353	Re: Another one underway! Meet project Savannah Subbed __________________ TA_C10 Stage 1 build - http://67-72chevytrucks.com/vboard/s....php?p=8333444 "It's only money".



Register or Log In To remove these advertisements.

11-15-2020, 12:14 AM	#17
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Another one underway! Meet project Savannah I’m in __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-22-2020, 07:59 PM	#18
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,302	Re: Another one underway! Meet project Savannah Im setting my dial to this station tooo __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

11-23-2020, 01:40 PM	#19
68Gold/white Registered User Join Date: Sep 2011 Location: Ark City, Kansas Posts: 3,409	Re: Another one underway! Meet project Savannah Take ya'lls time. We need another good read!!!

11-24-2020, 01:23 AM	#20
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,254	Re: Another one underway! Meet project Savannah Riding along __________________ 71 C10 72 K20 72 K10 Super Kirk

11-24-2020, 04:18 PM	#21
68cajun 68 C/10 Join Date: Oct 2003 Location: Houma Louisiana Posts: 367	Re: Another one underway! Meet project Savannah I’ll follow along also __________________ (2009) GMC Sierra Denali 6.2 AWD (67 C/10 fleetside SWB) (2018GMC Yukon Denali) Wifes Car

01-12-2021, 12:39 AM	#22
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,108	Re: Another one underway! Meet project Savannah Our Moser 5 lug axles came in today. We have used them in a bunch of trucks and they really work nice. Also assembled the new tail light lenses on the restored housings with new gaskets, bulbs and stainless screws. Now to snag a rear end cover gasket and some Redline Differential Oil for the axle update. POP Attached Images __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-12-2021, 02:42 PM	#23
MDPotter Senior Member Join Date: Aug 2018 Location: Western Colorado Posts: 1,165	Re: Another one underway! Meet project Savannah Looks like an excellent foundation for your build! How did you find a Gen III LS with only 42k miles on it??? __________________ 1964 Chevy C10 - Gen IV 5.3 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=768632 1968 GMC C15 - Gen III 6.0 Restomod http://67-72chevytrucks.com/vboard/s...d.php?t=772047 1969 Chevy C10 - Restoration http://67-72chevytrucks.com/vboard/s...d.php?t=809184 1978 Chevy Scottsdale K20 1993 Chevy C1500 - 5.3/T56 swapped 2008 Silverado Duramax

Register or Log In To remove these advertisements.