1985 S10 part out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**8man** · 03-09-2020, 10:35 AM

As it says, complete S10, 4.3 has a knock, but everything else is there. Let me know if you want anything. Can send pictures to verify.

SCOTI · 06-30-2020, 02:50 PM

Quote:

Originally Posted by 8man

As it says, complete S10, 4.3 has a knock, but everything else is there. Let me know if you want anything. Can send pictures to verify.

I was waiting with hopes of the corona-virus dissipating but that seems unlikely forcing a co-existence for the foreseeable duration.

What is the status on this?

**8man** · 06-30-2020, 05:13 PM

I need the complete frame and the brake pedal assembly for my 54 swap.

I don't need the rear axle, none of the body parts, seat has been recovered in a brown naugahide and atually looks good. Everything is up for grabs.

Yeah, supposed to be in Carrolton at the granddaughter's birthday party Sunday, but no go because of the Corona thing. The truck is sitting at the ranch waiting for me to get done with the 48 so I can really start on the 54. If you have any questions let me know.

Thanks.

SCOTI · 06-30-2020, 05:42 PM

I have a buddy in Carrolton building a '59 Lark & was needing an early 2wd S10 rear end so he can push forward on his V8 conversion. I saw this weeks ago but w/the stay-home quarantine mandate didn't pursue it. Since things seem like they're going to drag on I figured we're all adapting to new 'safe' practices & it might be worth inquiring about.

**8man** · 06-30-2020, 05:45 PM

I have the rear end, just need to work out logistics. Ask him is $150 is fair if I pull it.

SCOTI · 06-30-2020, 11:32 PM

Quote:

Originally Posted by 8man

I have the rear end, just need to work out logistics. Ask him is $150 is fair if I pull it.

I'll ask him.

Q.8 · 07-06-2020, 08:57 PM

Quote:

Originally Posted by 8man

As it says, complete S10, 4.3 has a knock, but everything else is there. Let me know if you want anything. Can send pictures to verify.

Hello. Can you upload interior pics. Dash, pillars . Sill plates etc. i need some parts. Thanks

SCOTI · 07-06-2020, 09:46 PM

Quote:

Originally Posted by 8man

I have the rear end, just need to work out logistics. Ask him is $150 is fair if I pull it.

Quote:

Originally Posted by SCOTI

I'll ask him.

My buddy is interested in the rear end. Any possibility you know the gear ratio or have the VIN to possibly look it up?

**8man** · 07-07-2020, 08:44 AM

Q.8 I'll get some pics, but it will be next week before I can get them to you.

Scotti, just pm'd you.

Q.8 · 07-11-2020, 02:45 AM

Quote:

Originally Posted by 8man

Q.8 I'll get some pics, but it will be next week before I can get them to you.

Scotti, just pm'd you.

Ok. Thanks

trukman1 · 10-07-2020, 05:41 PM

Does it have the chrome rear bumper and will it fit an '89 S10 Durango version? If so, can I get some pictures? Thanks

**8man** · 10-08-2020, 08:50 AM

Trukman, I'll get you a pic of the bumper, it is chrome, but is not perfect. As far as "will it fit", I can get the measurement between the frame and you can measure on your truck.

trukman1 · 10-08-2020, 01:21 PM

8man.

Thanks, I appreciate it.

trukman1

**8man** · 10-16-2020, 04:00 PM

IMG_0664 by Robert Moorman, on Flickr

IMG_0665 by Robert Moorman, on Flickr

The rear frame is 40" outside to outside where the bumper mounts.

Let me know if this works for you.

Thanks

trukman1 · 10-18-2020, 11:03 AM

Thanks for the pictures, 8man. That bumper isn't the style my dad wants. He wants a bumper that matches the factory bumper that came on his which has rubber around the sides and top. Thanks again for taking the time to send pictures. trukman1

03-09-2020, 10:35 AM	#1
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	1985 S10 part out As it says, complete S10, 4.3 has a knock, but everything else is there. Let me know if you want anything. Can send pictures to verify. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

06-30-2020, 05:13 PM	#3
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: 1985 S10 part out I need the complete frame and the brake pedal assembly for my 54 swap. I don't need the rear axle, none of the body parts, seat has been recovered in a brown naugahide and atually looks good. Everything is up for grabs. Yeah, supposed to be in Carrolton at the granddaughter's birthday party Sunday, but no go because of the Corona thing. The truck is sitting at the ranch waiting for me to get done with the 48 so I can really start on the 54. If you have any questions let me know. Thanks. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

06-30-2020, 05:42 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: 1985 S10 part out I have a buddy in Carrolton building a '59 Lark & was needing an early 2wd S10 rear end so he can push forward on his V8 conversion. I saw this weeks ago but w/the stay-home quarantine mandate didn't pursue it. Since things seem like they're going to drag on I figured we're all adapting to new 'safe' practices & it might be worth inquiring about. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-30-2020, 05:45 PM	#5
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: 1985 S10 part out I have the rear end, just need to work out logistics. Ask him is $150 is fair if I pull it. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

07-07-2020, 08:44 AM	#9
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: 1985 S10 part out Q.8 I'll get some pics, but it will be next week before I can get them to you. Scotti, just pm'd you. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-07-2020, 05:41 PM	#11
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: 1985 S10 part out Does it have the chrome rear bumper and will it fit an '89 S10 Durango version? If so, can I get some pictures? Thanks __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

10-08-2020, 08:50 AM	#12
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: 1985 S10 part out Trukman, I'll get you a pic of the bumper, it is chrome, but is not perfect. As far as "will it fit", I can get the measurement between the frame and you can measure on your truck. __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-08-2020, 01:21 PM	#13
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: 1985 S10 part out 8man. Thanks, I appreciate it. trukman1 __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps

10-16-2020, 04:00 PM	#14
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,357	Re: 1985 S10 part out IMG_0664 by Robert Moorman, on Flickr IMG_0665 by Robert Moorman, on Flickr The rear frame is 40" outside to outside where the bumper mounts. Let me know if this works for you. Thanks __________________ 8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

10-18-2020, 11:03 AM	#15
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: 1985 S10 part out Thanks for the pictures, 8man. That bumper isn't the style my dad wants. He wants a bumper that matches the factory bumper that came on his which has rubber around the sides and top. Thanks again for taking the time to send pictures. trukman1 __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.