Badges - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 12-17-2020, 02:05 PM

I thought that was called a gree-ille

Andy4639 · 12-20-2020, 12:10 AM

Ramp truck got it's badges.

**Ironhorse** · 12-20-2020, 12:22 AM

Cool badges Andy. Wonder how they would work on a 67-68 gauge cluster in the choke delete position? Maybe ?

Andy4639 · 12-20-2020, 12:34 AM

Quote:

Originally Posted by Ironhorse

Cool badges Andy. Wonder how they would work on a 67-68 gauge cluster in the choke delete position? Maybe ?

I have a couple of old cluster I give it a look see and post pictures of how it looks.

**special-K** · 12-20-2020, 10:16 AM

That was my first thought on these

Andy4639 · 12-20-2020, 03:14 PM

Quote:

Originally Posted by Ironhorse

Cool badges Andy. Wonder how they would work on a 67-68 gauge cluster in the choke delete position? Maybe ?

Here you go. Not all that pretty of a picture though.
The first picture has the collar under the badge the other 2 don't.

**special-K** · 12-21-2020, 06:50 AM

Just a tad too small I guess.

Andy4639 · 12-22-2020, 12:53 AM

Quote:

Originally Posted by special-K

Just a tad too small I guess.

That's what I thought to. Those dang Chicklets are multipling!
Picked up some mirror sensors and a couple more mirrors to boot.

**'68OrangeSunshine** · 12-22-2020, 01:03 AM

You could make a buncha keychains. Cut out some ''teardrop'' shapes from plexiglas, epoxy the chicklet to the wide end and a 1/8th hole in the small end for a split wire keyring. I'd pay $5 for one. [If I had any money...]

Andy4639 · 12-22-2020, 02:42 PM

Now that's a idea...I had thought just drill a small hole in it and use.

Andy4639 · 12-22-2020, 05:43 PM

Here is what I did. I cleaned them good and got all the old glue off of them. Then I re glued them together. Drilled the hole. Done!

Redneck Rydes · 12-22-2020, 11:23 PM

Great idea,I've got about 50 new ones left,gonna make 25 key chains for all the kin folk for x-mas,awsome idea!

**Ol Blue K20** · 12-23-2020, 06:18 AM

That is a cool idea. It looks pretty cool.

ChevyRacefan · 12-24-2020, 11:09 AM

I plan on adding those badges to the interior of a few of my g.m. vehicles.
Cutting the line below the G.M. out to house a USB port, Hiding the phone charging port in plan sight.

Andy4639 · 12-24-2020, 12:41 PM

Quote:

Originally Posted by ChevyRacefan

I plan on adding those badges to the interior of a few of my g.m. vehicles.
Cutting the line below the G.M. out to house a USB port, Hiding the phone charging port in plan sight.

Post up some pictures when you do please.

**Ironhorse** · 12-24-2020, 04:09 PM

Another thought Andy, maybe cutt a small square backing piece from some grained plastic from a broken dash bezel. Smooth and trim the edges, maybe slight bevel? Affix the chiclet to it and then use 3m adhesive tape to place on the dash?

Like the key chain idea also.

**'68OrangeSunshine** · 12-31-2020, 10:41 PM

Hey Andy,
Thanks for the Chicklets.
Happy New Year!

Andy4639 · 01-01-2021, 01:30 PM

Quote:

Originally Posted by '68OrangeSunshine

Hey Andy,
Thanks for the Chicklets.
Happy New Year!

Your welcome sir, Happy New Year to all of you as well!

12-17-2020, 02:05 PM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Badges I thought that was called a gree-ille __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-20-2020, 12:10 AM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Badges Ramp truck got it's badges. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-20-2020, 12:22 AM	#28
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,153	Re: Badges Cool badges Andy. Wonder how they would work on a 67-68 gauge cluster in the choke delete position? Maybe ? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-20-2020, 10:16 AM	#30
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Badges That was my first thought on these __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-21-2020, 06:50 AM	#32
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Badges Just a tad too small I guess. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-22-2020, 01:03 AM	#34
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,183	Re: Badges You could make a buncha keychains. Cut out some ''teardrop'' shapes from plexiglas, epoxy the chicklet to the wide end and a 1/8th hole in the small end for a split wire keyring. I'd pay $5 for one. [If I had any money...] __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

12-22-2020, 02:42 PM	#35
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Badges Now that's a idea...I had thought just drill a small hole in it and use. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-22-2020, 05:43 PM	#36
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Badges Here is what I did. I cleaned them good and got all the old glue off of them. Then I re glued them together. Drilled the hole. Done! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

12-22-2020, 11:23 PM	#37
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: Badges Great idea,I've got about 50 new ones left,gonna make 25 key chains for all the kin folk for x-mas,awsome idea!

12-23-2020, 06:18 AM	#38
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,963	Re: Badges That is a cool idea. It looks pretty cool. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

12-24-2020, 11:09 AM	#39
ChevyRacefan Registered User Join Date: Sep 2013 Location: Newton,N.C. Posts: 317	Re: Badges I plan on adding those badges to the interior of a few of my g.m. vehicles. Cutting the line below the G.M. out to house a USB port, Hiding the phone charging port in plan sight.

12-24-2020, 04:09 PM	#41
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,153	Re: Badges Another thought Andy, maybe cutt a small square backing piece from some grained plastic from a broken dash bezel. Smooth and trim the edges, maybe slight bevel? Affix the chiclet to it and then use 3m adhesive tape to place on the dash? Like the key chain idea also. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

12-31-2020, 10:41 PM	#42
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,183	Re: Badges Hey Andy, Thanks for the Chicklets. Happy New Year! __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.