1968 Stepside 4X4, what’s wrong here? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**57NAPCO** · 01-04-2021, 05:00 PM

Not sure what going on with the front end, 2 wheel drive converted? Front diff went out and replaced with a different one? Or is that factory

**1971Stepside** · 01-04-2021, 06:17 PM

drive it into some concrete and it will work better...

**bhc41051** · 01-04-2021, 06:25 PM

I'm thinking your VIN number starts with a "C" instead of a "K"

67C10Step · 01-04-2021, 06:39 PM

Yikes! Flat plate and rebar. Looks fact-o-ree to me....ha, ha, ha.

May70 · 01-04-2021, 06:40 PM

Nice power assisted steering setup lol...

**57NAPCO** · 01-04-2021, 07:00 PM

For sale on faceless, $28,500 lol

[img]https://i.postimg.cc/sXQRzWxT/BF6-AA...03-DB07-B8.png[img]
Posted via Mobile Device

**special-K** · 01-04-2021, 07:35 PM

That's a lot of money for a '68 S10

**kwmech** · 01-04-2021, 07:52 PM

Looks factory, but had some not so fabrication done to it for a poor mans lift in the front. Bottom of front frame rail does not look 2wd. Most people would not install the 2nd cross member under the trans. Period correct front axle. Any other pics to contribute?

**57NAPCO** · 01-04-2021, 09:32 PM

Nice looker....
https://www.facebook.com/marketplace...4139738411034/

I thought the 67 4X4 was the difficult one to lift. I had one that someone had cobbled up pretty bad.

Carl Spangler · 01-04-2021, 09:42 PM

I think an alien is just about ready to pop out of that door.

gmc684x4 · 01-05-2021, 12:53 AM

Factory 4x4 chassis although what in the trailer park they did to the front springs
Looking again at the drivers side has extra funky bracing my guess is something broke on the dr side started all this funky bracing
Correct tranny cross member closed knuckle dana 44 is correct as well
I like the bondo queen flaking doors

01-04-2021, 05:00 PM	#1
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,218	1968 Stepside 4X4, what’s wrong here? Not sure what going on with the front end, 2 wheel drive converted? Front diff went out and replaced with a different one? Or is that factory

01-04-2021, 06:17 PM	#2
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Re: 1968 Stepside 4X4, what’s wrong here? drive it into some concrete and it will work better... __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

01-04-2021, 06:25 PM	#3
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: 1968 Stepside 4X4, what’s wrong here? I'm thinking your VIN number starts with a "C" instead of a "K"

01-04-2021, 06:39 PM	#4
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,451	Re: 1968 Stepside 4X4, what’s wrong here? Yikes! Flat plate and rebar. Looks fact-o-ree to me....ha, ha, ha. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

01-04-2021, 06:40 PM	#5
May70 Registered User Join Date: Jan 2019 Location: Hampton Roads VA Posts: 644	Re: 1968 Stepside 4X4, what’s wrong here? Nice power assisted steering setup lol... __________________ 70 C20 Build link : Project Montezuma http://67-72chevytrucks.com/vboard/s...d.php?t=794479 How to repair that rusted out 67-72 c10-c30! Please subscribe! https://www.youtube.com/c/MaycoCustomRestorations

01-04-2021, 07:00 PM	#6
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,218	Re: 1968 Stepside 4X4, what’s wrong here? For sale on faceless, $28,500 lol [img]https://i.postimg.cc/sXQRzWxT/BF6-AA...03-DB07-B8.png[img] Posted via Mobile Device

01-04-2021, 07:35 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: 1968 Stepside 4X4, what’s wrong here? That's a lot of money for a '68 S10 __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-04-2021, 07:52 PM	#8
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,487	Re: 1968 Stepside 4X4, what’s wrong here? Looks factory, but had some not so fabrication done to it for a poor mans lift in the front. Bottom of front frame rail does not look 2wd. Most people would not install the 2nd cross member under the trans. Period correct front axle. Any other pics to contribute?

01-04-2021, 09:32 PM	#9
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,218	Re: 1968 Stepside 4X4, what’s wrong here? Nice looker.... https://www.facebook.com/marketplace...4139738411034/ I thought the 67 4X4 was the difficult one to lift. I had one that someone had cobbled up pretty bad.

01-04-2021, 09:42 PM	#10
Carl Spangler Registered User Join Date: Oct 2013 Location: Central Coast Ca. Posts: 417	Re: 1968 Stepside 4X4, what’s wrong here? I think an alien is just about ready to pop out of that door. __________________ 1971 SWB step side: Original NM Forestry and then NM Fire truck

01-05-2021, 12:53 AM	#11
gmc684x4 Registered User Join Date: Jul 2012 Location: Whitehorse yukon Posts: 1,218	Re: 1968 Stepside 4X4, what’s wrong here? Factory 4x4 chassis although what in the trailer park they did to the front springs Looking again at the drivers side has extra funky bracing my guess is something broke on the dr side started all this funky bracing Correct tranny cross member closed knuckle dana 44 is correct as well I like the bondo queen flaking doors



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.