Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-08-2021, 09:56 AM | #1 |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Parts still available from the GM Dealer
Edited in list format:
Last week I ordered a couple of small parts for my '70 Blazer from my local GM dealer. These were: Washer jug 3840083 (may need to add the zero to the beginning) $50 list 1969-1972 E-Brake release handle 3893179 (may need to add the zero to the beginning) $11 list What other parts have you guys bought from the GM dealer within the past year? --------------------------------------------------------------------------------------
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels Last edited by 1970cstblazer; 04-17-2021 at 10:32 AM. |
04-08-2021, 10:22 AM | #2 |
Carpe manana
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,410
|
Re: Parts still available from the GM Dealer
Hood hinge. LH side I believe. Was loose though so had it rebuilt then phosphate coated anyway.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland |
04-08-2021, 10:55 AM | #3 |
Senior Member
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,572
|
Re: Parts still available from the GM Dealer
Every time I call them they laugh at me. Locally they don't have anything unless the vehicle is newer than a 2010. When GM burned all their vendors a few years back by filing BK a lot of parts went away-----forever.
It's actually easier to get parts for my 50 year old trucks than it is my 91 Suburban. |
04-08-2021, 11:18 AM | #4 |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Re: Parts still available from the GM Dealer
RH is listed as available 3911706 $114.95 list
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
04-08-2021, 11:20 AM | #5 | |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Re: Parts still available from the GM Dealer
Quote:
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
|
04-08-2021, 11:53 AM | #6 |
Carpe manana
Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,410
|
Re: Parts still available from the GM Dealer
Could be: http://67-72chevytrucks.com/vboard/s...30&postcount=5
The only way my local parts guy could get it at the time was to take overnight delivery. Routine orders were not being accepted at that time d/t virus related back log at the Lansing SPO warehouse.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland |
04-08-2021, 08:59 PM | #7 |
Registered User
Join Date: Aug 2019
Location: Cheraw
Posts: 1,305
|
Re: Parts still available from the GM Dealer
When I was working at the Lansing SPO warehouse in the 70's, you would have cried at the parts that we put in the crusher. Obsolete after 9 years.
|
04-09-2021, 07:40 AM | #8 |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Re: Parts still available from the GM Dealer
Please stay on topic. Share if you have bought a new GM part from the dealer recently, and part number too.
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
04-09-2021, 09:43 AM | #9 |
Senior Member
Join Date: Mar 2013
Location: Dallas NC
Posts: 587
|
Re: Parts still available from the GM Dealer
Local dealer here will help but you have to have a valid part number, was able to order the spring that holds the clutch fork onto the ball mounted on the bellhousing came in a package of 5 sorry don't have the number handy.
|
04-09-2021, 12:58 PM | #10 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,269
|
Re: Parts still available from the GM Dealer
I've never bought a local original part in my life. I take it back, found a defrost vent 25 years ago at the wrecking yard, the guy says shoot, I didn't know it was there
There aren't many trucks locally and the wrecking yards cleared of them a long time ago. I remember wrecking yard that had quite a few. He ended up scrapping what was left, and apparently a local repop. dumped tons of OEM decades ago as well. If they only knew.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
04-09-2021, 09:27 PM | #11 |
Senior Member
Join Date: Jul 2000
Location: North Texas
Posts: 3,544
|
Re: Parts still available from the GM Dealer
Funny. This thread reminds me of when I bought my 69 C10 back in 1989. I could still buy just about any part you can think of from my Chevy dealer.
Outer grille ($120-something) Cab mount bushings Cam, lifters, and timing set Gasket set TH350 frame-to-trans shift bracket Wheel bearings and races And lots more small parts I've forgotten about. I was able to talk one of the counter guys into giving me jobber pricing for the used car lot where I bought the truck, so my price was 25% off list or better.
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
04-11-2021, 12:06 AM | #12 | |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,269
|
Re: Parts still available from the GM Dealer
Quote:
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
|
04-11-2021, 04:42 AM | #13 |
Senior Member
Join Date: Jul 2000
Location: North Texas
Posts: 3,544
|
Re: Parts still available from the GM Dealer
And that was inner and outer, right?
__________________
Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
04-11-2021, 10:35 AM | #14 |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Re: Parts still available from the GM Dealer
Added more to the list as I find time to verify availability
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
04-11-2021, 12:09 PM | #15 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,269
|
Re: Parts still available from the GM Dealer
Yep. I drove my C10 there from about 100 out because I had thoughts of a bed plastic bed liner for my old bed. They or a yard next door? said they had one. Sure, with a 4 foot long crack in it. Engine was running HOT, must have been 100 some out, the engine was tired anyway and I had the heater running.
Couple years later I bought 15x8 Rally's, with caps that are almost fully chrome out of Sacramento too. If I remember right the wheels are stamped 1992. Bolts too, that I can't seem to find at the moment, think I had them zinc plated forgot to list em Decent caps and the wheels great. I paid $300ish shipped. SMOKING deal on NOS caps and bolts for sure, just four years ago too @ $150 & not a mark on them. Deals were out there until recently for the most part. The two stainless (73) version NOS caps I picked up four years ago run 3-4x my cost. I need two more Nice to have the option
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
04-17-2021, 10:30 AM | #16 |
All stock and staying that way
Join Date: Jul 2003
Location: Elkland, PA
Posts: 1,545
|
Re: Parts still available from the GM Dealer
More added
__________________
1970 K/5 Blazer CST 4WD, Medium Bronze, 93k ACT. miles, 350, 4 speed, rear positraction, 16.5" x 8.25" HD wheel option, tilt, tach, vacuum, AM/FM, manual throttle...Dad ordered and purchased new 4/70. Currently frame off restoration finally getting close to completion.. 1972 Cheyenne Super 20 2WD, DK Blue/White, 90K ACT. miles, 402, TH400, 4.10 open, tilt, tach, vacuum, A/C, AM/FM, manual throttle.. A mostly original paint never rusted Texas survivor... 2017 Sierra 1500 SLT 4WD, Black, 45k miles, 5.3, 6L80E, 3.42 LS, 20" polished wheels, everything but moonroof and 6.2... 2019 Canyon SLT 4WD, White, 62k miles, 3.6, 8L45, 3.23 LS, 18" wheels |
04-21-2021, 03:22 PM | #17 |
Cluster King
Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: Parts still available from the GM Dealer
Brings back some memories of my Michigan days. When I was 17, I rode my bike to the local GM warehouse (Drayton Plains, MI) and bought with my dads GM id, a pass side brand new fender for my 72 swb for $69.38 cents and holding it with one arm and riding it back home on my bike.
The last I heard, they stock nothing over 3 yrs old now. The good old days are gone
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C |
Bookmarks |
|
|