![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2012
Location: Desoto, MO
Posts: 28
|
Anyone Running an LSA in a 63-72?
Looking for anyone who has put an LSA in a 63-72. Specifically trying to find out if the stock accessory drive fits in the frame. Thanks fellas!
|
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Dec 1999
Location: Southern California
Posts: 2,820
|
Re: Anyone Running an LSA in a 63-72?
Installed an LSA in my 72 K10. Not running yet but you can see pics in my build thread. I never considered using the stock accessory drive because there are no provisions for a power steering pump. The low mount A/C would be close if it even fits.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2012
Location: Desoto, MO
Posts: 28
|
Re: Anyone Running an LSA in a 63-72?
Are the frame widths the same between the 2wd and 4wd? My LSA was out of a ZL1 so it didn't have the p/s pump but the CTS-V had hydraulic p/s. I won't be running AC in the truck.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Dec 1999
Location: Southern California
Posts: 2,820
|
Re: Anyone Running an LSA in a 63-72?
I think so. For sure the same at core support. Think the 4wd frame raises a bit more than 2wd over the front axle area.
__________________
Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 534
|
Re: Anyone Running an LSA in a 63-72?
I don't have an LSA in mine, but the L83 I have does have a low mount A/C and it fits within the frame rails easily. I am also running a p/s pump on the lower drivers side using the GM Type II pump and there is plenty of room. I am going to run a remote reservoir though.
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Sep 2012
Location: Desoto, MO
Posts: 28
|
Re: Anyone Running an LSA in a 63-72?
Quote:
|
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 534
|
Re: Anyone Running an LSA in a 63-72?
I used ITC Billet. They have 4-5 adjustment front to back. I had to mount the engine 1.75" forward of where it originally mounted and trimmed the mount so the A/C compressor would fit. Everything came out nice.
https://www.ictbillet.com/sbc-to-ls-...acket-set.html |
![]() |
![]() |
![]() |
Bookmarks |
|
|