65 c20 revival

[SpudWrench]

Thanks all for the kind words. It’s been an absolute blast working on it. Here’s a small update. After looking at my assembly manual think I may have to flip my link bar. Whoops. I rebuilt the steering box as well. Rearend got its first scrub and pressure wash treatment today. It’s stamped HW my manual says this is a 4.11 ratio non posi, thankful for that. I just plan on resealing rearend but may change bearings if I see something I don’t like. Probably squirt down carrier with kerosene.

Thoughts on the kerosene for cleaning a carrier and inside the rearend?

What brand 90wt are you guys using on your HO52s?

Going to use all felpro gaskets, SKF or Timkin seals and my favorite rtv especially on lower bolts. I understand they sweat commonly. I spent an hour with a putty knife before I could even start degreasing
Posted via Mobile Device