Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-30-2022, 04:10 PM | #26 |
Registered User
Join Date: Mar 2022
Location: Surrey BC
Posts: 826
|
Re: Front Bumper Option
mold in question. this is for the bottom of glove box that needed to clear a larger than factory delux heater. A lot of the masking tape pulled off when I made the bottom, but I was able to re-use the same mold without that notch at the back to make the top half and used packing tape for the top. For the bumper I would not rely on tape. I could destroy the cardboard mold if needed and deformed it quite a bit getting bottom out. Bumper would not be so forgiving I'm contemplating a headliner molded on roof. Someone on here did that but never posted the final results |
11-30-2022, 04:15 PM | #27 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,095
|
Re: Front Bumper Option
I've used wax paper before, kitchen variety.
|
11-30-2022, 06:46 PM | #28 |
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Front Bumper Option
Thank you everyone for the direction.
|
12-01-2022, 01:12 PM | #29 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: Front Bumper Option
i wouldn't use cloth, use 3/4oz mat.
cloth doesn't lay well without wrinkling up, wrinkles are air that need grinding out look thru my build a bit, i documented quite a bit of fiberglass fabricobbling buy a gallon of un waxed resin and 5 yards of 3/4oz mat you probably won't need a gal, but buying 2 qts is probably the same cost if you need help ask in my thread, i'm snowbirding in tx for the next 4 months i won't have pictures like on the pc but i can talk you thru what isn't in my build here is where i bought my materials uscomposites.com/polyesters just get the 404 Tooling Polyester Resin-Isophthalic
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
12-01-2022, 01:21 PM | #30 |
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Front Bumper Option
Thanks for your help everyone. I sure appreciate how nice everyone is here.
|
12-05-2022, 10:37 AM | #31 |
Registered User
Join Date: Feb 2016
Location: Hebron
Posts: 1,144
|
Re: Front Bumper Option
can you post a picture of what your truck looks like upfront??
__________________
RUBBER DOWN AND HIT THE ROAD!!! 1940 Ford Dlx Coupe 1969 Mach1 |
12-05-2022, 02:27 PM | #32 |
56 - autocross
Join Date: Apr 2010
Location: Camarillo, Ca
Posts: 1,121
|
Re: Front Bumper Option
I cant yet- its in pieces.
|
12-06-2022, 01:02 AM | #33 |
Registered User
Join Date: Oct 2018
Location: Warsaw IN
Posts: 897
|
Re: Front Bumper Option
Back in my surfing days we used balsa wood runners for strength. We used soap or car wax for mold release in our skateboard molds.
|
Bookmarks |
|
|