L83/L86/LT swap - what A/C compressor?

[Joyridin]

Originally Posted by 87chevy.com

Not sure what burned up, sounds like he had a wiring problem, bad compressor to begin with or poor aftermarket quality compressor...

Ive been running stock gen5 compressor with the factory solenoid valve tied into the compressor clutch for 4+ years zero problems, 2 other builds, no problems. 2 of them use the a/c can bus module to turn them on. 1 with stock 1987 a/c on power, and 1 with vintage air ground signal input to module (that turns on a/c) both work exactly the same, normal.

clint

That is good to know. I assume all Gen 5 were variable displacement compressors? I know GM mixed - n - matched on the Gen 4 depending on exact the year of the vehicle. They were still using fixed displacement up to 2015 in certain very limited cases.

Thanks!