|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-11-2004, 08:23 PM
|
#1 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
It all is going. Links and other stuff not on ebay.
I have some stuff on ebay for sale. Here is the link for my ebay stuff. I also have stuff not on ebay. I have lots of misc gauge parts, lenses and bezels. Some sheetmetal, and possibly a SWB frame with front discs and 72 BB motormounts. The sheetmetal must be picked up here. I will not ship. I have a driver and passenger fender for a 67-68 for $25 for the pair. The passenger side needs the front bottom under the battery replaced. The driverside needs only minor work. The frame I want $550 for. It's been powder coated and is in very nice shape. The coating was done about 5-7 years ago and the frame was left outside by the previous owner who also appears to have dragged it around by a chain. Everything is there except the auto trans x-member and the center link for the steering. It has a 6 lug 69 rear end under it right now, but comes with a 72 housing that needs rebuilt. One of the bearings is frozen and needs to be cleaned and rebuilt. One of the axles in the 72 housing was ruined from the frozen bearing and was trashed, so it only has one axle. It has a posi with 3.73 gears that goes also. This will have to be picked up as well. Any questions or requests for pics, let me know.
|
|
|
|
08-11-2004, 09:33 PM
|
#2 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
Rearview mirror, Good shape although picture doesn't show it. Mirror looks pretty clear, stainless is in good shape. $10 plus ride
Complete pedal setup for 4-speed. These have been disassembled, cleaned and rebuilt. painted cast grey and ready to bolt in. $20 plus ride. |
|
|
|
|
08-11-2004, 10:40 PM
|
#3 |
|
Senior Member
 
Join Date: Sep 2002
Location: Hampstead, NC
Posts: 8,187
|
If interested in selling the 72 bb mounts, please keep me in mind.
Thanks. |
|
|
|
|
08-12-2004, 08:04 AM
|
#4 |
|
Registered User
Join Date: Dec 1999
Location: BRADENTON FLA
Posts: 3,269
|
Any chance you have some Saginaw 4 speed input shafts, cluster gears or reverse gears laying around?
__________________
Rest in Peace Ed. Thanks for all the good times. |
|
|
|
|
08-12-2004, 08:38 AM
|
#5 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Do you have a rear mount blazer fuel tank by chance?
|
|
|
|
|
08-12-2004, 09:56 AM
|
#6 |
|
Senior Moment
Join Date: Mar 2002
Location: Pittsburg Ca
Posts: 4,138
|
I'll take the Complete pedal setup for 4-speed
PM sent
__________________
1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565 |
|
|
|
|
08-12-2004, 10:43 AM
|
#7 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
Ed,
I have a complete Saginaw 4-speed, but I was planning on keeping it. It's disassembled and being rebuilt right now. If I decide to get rid of it, I will keep you in mind. Jason |
|
|
|
|
08-12-2004, 10:44 AM
|
#8 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
No blazer tanks but I have a behind the seat tank for free if you want it
 I kinda want to sell the motor mounts with the frame if possible, but if I can't sell the frame, I will take them out. jmanz69 |
|
|
|
|
08-12-2004, 10:45 AM
|
#9 | |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Quote:
 Do you have alot of misc parts? Maybe I should swing by 
|
|
|
|
|
|
08-12-2004, 03:03 PM
|
#10 |
|
Registered User
Join Date: Apr 2003
Location: ROMEO, MI
Posts: 39
|
How much for just the posi?
Also, by chance do you have a hood for a 68 chevy in good condition? |
|
|
|
|
08-12-2004, 05:47 PM
|
#11 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
More stuff.
2 69-72 fenders. one each of driver and passenger side. Both in very reapirable shape. $35 each or best. Must pick up. cast iron bellhousing. Very nice shape. $25, prefer local pick up, but will ship-you pay for ride. Driver side step fender. In need of repair, but I think it could be fixed by someone with more metal fabricating ability than I have. $25 local pick up only. window regulators 67-71 style. Both in working condition. $7 each plus ride. Vent windows, one of each side. In good shape. non tinted glass. rubber could use replaced. $10 each local pickup only. Too hard to find a box for them. I also have a bunch of harnesses. All in one box, you buy one you get them all. Most are in good to fair shape. a couple engine, front lights and misc. $20 for all of them plus ride. I have a ton of gauge parts. Some dashes mostly complete, some incomplete. prices range from $5-15 for them. Let me know what you need and I'll see if I have it. Camaro tach, good shape. was going to put in my dash, but never did. $25 plus ride. More parts as I come across them. I have nothing rare, so don't ask. |
|
|
|
|
08-14-2004, 10:24 AM
|
#12 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
Pedals sale pending funds. Still have lots of stuff to go.
|
|
|
|
|
08-14-2004, 04:33 PM
|
#13 |
|
Senior Member
Join Date: Aug 2004
Location: Lake Geneva, WI 53147
Posts: 970
|
Could you take a few pics of the truck frame and post or pm me with them . John
|
|
|
|
|
08-14-2004, 05:43 PM
|
#14 |
|
1FINE69
Join Date: Aug 2003
Location: Detroit, Michigan
Posts: 239
|
Jmanz, sounds like I need to stop by and check out what you've got to get rid of . Too bad its not going together as weel as you had planned.
__________________
Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD |
|
|
|
|
08-14-2004, 05:49 PM
|
#15 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
John,
I will roll it out this weekend and take pics. There are a few nicks in the coating from being dragged by the chain before I got it. I have been just painting with black paint and it looks good. It's not the same as powder, but I just didn't want to have it stripped again. cwilli84 C'mon over! I'll show you what I have and you can take it home with you. Let me know if you want to stop by. I will be home all weekend. Jason |
|
|
|
|
08-14-2004, 08:40 PM
|
#16 |
|
Registered User
Join Date: Apr 2001
Location: Scottsburg, In
Posts: 160
|
Posi?
How much for just the posi? Is it a 5 or 6 bolt?
Thanks!
__________________
Gaddman Scottsburg, In 67 SWB w/93 step bed 68 LWB Fleetside C10 Custom 50 Chevy 3600 74 Norton Commando 850 72 Norton Commando 750 |
|
|
|
|
08-14-2004, 08:45 PM
|
#17 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
There is another guy interested in the posi. It's out of the axle because the housing needs work and one of the axles were bad. It was a 5 bolt housing though, the longer ones. So now it's just the posi, no axles or housing. Would sell the posi for $75, but I would suggest a rebuild on it. It needs new clutches at least.
If this guy doesn't want it, I'll let you know. Thanks Jason |
|
|
|
|
08-14-2004, 10:04 PM
|
#18 |
|
67-72 parts collector,…
Join Date: Nov 2002
Location: Mid-MO
Posts: 22,698
|
How much for just the '72 BB mounts?. Also is this the engine mounts or the frame stands or both?
|
|
|
|
|
08-14-2004, 10:08 PM
|
#19 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
I'm not interested in separating the mounts from the frame at this time. If I change my mind, I'll post it separately.
Thanks |
|
|
|
|
08-14-2004, 11:49 PM
|
#20 |
|
Fixing my 67, & loving it
Join Date: Jun 2004
Location: Bridge City, Texas
Posts: 524
|
PM sent
__________________
Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed 
|
|
|
|
|
08-15-2004, 09:45 PM
|
#21 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
I didn't get a chance to pull the frame out for pics this weekend, but I did find some from when I brought it home. They aren't the best, but I will try to get some better ones during the week.
|
|
|
|
|
08-16-2004, 10:42 PM
|
#22 |
|
Senior Member
Join Date: Aug 2004
Location: Lake Geneva, WI 53147
Posts: 970
|
Frame Questions
what is the condition of frame ,is it full of pits from prior rust ?
|
|
|
|
|
08-17-2004, 06:33 AM
|
#23 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
The frame is in great shape, it was originally from Texas and was blasted and powder coated. The only thing wrong is the rear end is not powder coated that is on it and it's six lug, and there are some chips in the coating from the previous owner dragging it by what looks like a chain to move it. When I got it, the rear axle was locked up from a frozen bearing. I put my 6 lug axle under it to be able to move it. It doesn't have a trans crossmember in it, but I have one I will throw in if you need it. It has the auto linkage pivot for a TH400 on the frame. I have no other linkage though. And like I said before, it has the 72 big block mounts in it. It looks very nice, but there are some minor blemishes. None of them are bad though. I can try to take better pics, just didn't have time to get it out of the garage this weekend.
|
|
|
|
|
08-17-2004, 07:17 AM
|
#24 |
|
Junior Member
Join Date: Oct 2003
Location: Milford, MI
Posts: 192
|
Do you still have the 67/68 fenders? Are they 67 or 68? I am interested and live in Milford, MI just off M59 so it would be easy for me to pick up. Thanks, Paul
|
|
|
|
|
08-17-2004, 07:29 AM
|
#25 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
I do still have them. Had a couple people interested, but no one replied yet. Come on over and take a look at them. I will be out of town today, but should be home the rest of the week. If you want to come on the weekend, sunday would be best, as I'm going to Woodward Saturday. They are 68 fenders with the sidemarker holes, but could be filled and used as 67 fenders. They have some dents, but are very repairable. I got them by accident before I knew there was a difference. Let me know
I have lots of other stuff too. What else do you need? Thanks jmanz6 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
