Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-11-2017, 11:23 AM | #51 |
Registered User
Join Date: Jul 2014
Location: South East Ohio
Posts: 644
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Great tutorial. I will be referring to this in the near future. To bad photobucket had to impose their damage to another fine thread. Even got the one at Pirate4x4
|
04-24-2018, 11:26 AM | #52 |
Registered User
Join Date: Apr 2016
Location: Willamette Valley, Or
Posts: 7
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Might want to rehost the photos on imgur or something. Looks like photobucket is holding them hostage.
|
04-24-2018, 11:49 AM | #53 | |
Registered User
Join Date: Mar 2014
Location: Lincoln Park, NJ
Posts: 189
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Quote:
For Firefox I'm using the "Photobucket Hotlink" extension. (think it would work in chrome too but not certain)
__________________
1970 C10 LWB 350SBC, SM330 Muncie (not saginaw SM326) (on tree), 3.07 open (assumed), PS, PB, Idiot lights |
|
04-24-2018, 12:02 PM | #54 |
Registered User
Join Date: Apr 2016
Location: Willamette Valley, Or
Posts: 7
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Works perfect in chrome. Thanks for the tip!
|
12-24-2018, 01:05 AM | #55 |
Registered User
Join Date: Aug 2011
Location: Dallas TX
Posts: 563
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
So Ive done a ton of stuff but never rebuilt a steering box (until today) Managed to get it all the way apart and back together working perfectly on the bench lock to lock smooth. Installed back in the truck and still smooth lock to lock. Added fluid and was turning the wheel while off to fill and bleed. Iafter about 4-5 lock to lock turns it got a stiff spot about 3/4 to lock on the right will go past it but there is a pop inside the box. Anyone ever run in to this and think they might know whats going on? Im petty sure all the balls were put in alternated but if I mixed up 2 could that be it? The color was so close it was hard to tell.
|
11-07-2019, 01:37 PM | #56 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,834
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Sub'd.
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
09-05-2020, 05:21 PM | #57 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,803
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
I'm doing this procedure, so I made a booklet with non-polluted pictures. I cropped a couple of the pictures and made minor spelling and punctuation changes. I included the follow-on discussion where questions were asked and answers provided, or just additional information provided. I printed it out and put it in a 3-brad school folder, and heading out to the garage.
https://pdfhost.io/v/K3p.eMnvo_TX_Fi...ng_gearbox.pdf |
09-05-2020, 07:27 PM | #58 |
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Excellent booklet of Tx Firefighter tutorial.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
09-06-2020, 09:19 PM | #59 | |
BlahBlahBlah
Join Date: Feb 2002
Location: Wa.
Posts: 19,980
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Quote:
__________________
… … … … … … … … ... … … … … … … … … … … … |
|
09-07-2020, 12:42 PM | #60 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
09-22-2020, 07:39 PM | #61 |
Registered User
Join Date: Feb 2017
Location: Victor, NY
Posts: 218
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Awesome write-up! Got my truck running for the first time in 15 years this weekend and the non-pitman bearing spewed out all the fresh new fluid in about five minutes. Your write-up is really going to make this a fun little project. I like the way you explain things. (Twice even!)
|
09-23-2020, 01:51 PM | #62 |
Registered User
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,069
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
This is a great thread, I always enjoyed TX firefighters informative posts..I see he hasnt been on since 2017, what ever happened to him?
__________________
Keagan 68 SWB C-10 original 350 A/C 503 Mean Green |
09-23-2020, 02:39 PM | #63 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,025
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
He focused on other things (work, family, his side hustles, etc...).
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
09-23-2020, 05:55 PM | #64 |
Registered User
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,069
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
haha, I get that. At times, these trucks or trucks in general come 2nd, 3rd, etc...Hopefully he will return here at some point. Seems like lots of guys take a break at times, then they eventually return.
__________________
Keagan 68 SWB C-10 original 350 A/C 503 Mean Green |
09-25-2020, 11:35 AM | #65 | |
Registered User
Join Date: Dec 2009
Location: Kirkland, WA
Posts: 1,302
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Quote:
__________________
1968 LWB C20 / AC / Wood Bed |
|
06-08-2021, 11:24 PM | #66 |
Registered User
Join Date: Jul 2015
Location: South Orange County CA
Posts: 1,265
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
I just wanted to ask a couple of questions.
For the input shaft seal: After re-installing the gland assembly, and it bottoms out and stops, you turn it 1/2" backwards. That is in relation to 1/2" of rotation, or a certain amount of degrees rotation relative to 1/2", correct? Also, I saw in another ideo that one could make a mark on the gland and on the nut and case to mark where the gland assembly should be after re-assemly. Is this a viable option to consider?
__________________
1963 C20, small window, long bed 292, 4-speed |
06-08-2021, 11:45 PM | #67 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,803
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
After you tighten the gland assembly, back it off by 1/2 inch as measured along the threads.
Last edited by dmjlambert; 06-08-2021 at 11:53 PM. Reason: better pic |
06-08-2021, 11:50 PM | #68 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,803
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
I probably would not tend to try to mark it before disassembly and try to line of the same marks when re-assembling. That is because I had success with the above method. Here is another thread where I considered various ways of making this adjustment, and ended up using the back-it-off-by-1/2-inch method. The proper way requires torque wrenches I don't have.
http://67-72chevytrucks.com/vboard/s...d.php?t=812162 |
04-16-2022, 09:09 AM | #69 |
Registered User
Join Date: Apr 2022
Location: Moorpark, CA
Posts: 767
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
I know this is a old thread but one of the main reasons I joined this forum was to learn 411 like this. Thanks Kevin
Now a 1 day owner of a 72.....and of course with a leaky steering box. My initial thought was I need to replace it but as mentioned most remans are a POS. I will get the seal kits and do this. First time for me doing a steering box but I have worn that hat 100's of times wrenching since I was 16. My box has a "S" so I assume its a Saginaw box and has a number 4. Its power steering |
12-28-2023, 12:37 AM | #70 |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,291
|
Re: Back to the Basics: Re-Sealing a leaky power steering box
Worth another bump - nice reference Lambert, and great write-up Kevin, as usual.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
Bookmarks |
|
|