|
01-13-2024, 06:55 PM | #1 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
A little update not getting much done things have been busy, but have gotten the backup lights mounted, ground down the welds between the firewall and cowl and have put in all the seat belt mounting, getting down the last few things before the bed and front end go out for sand blasting.
|
01-31-2024, 09:19 PM | #2 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
Took off all the brackets in prep for installing the new suspension and changed course on the dash extension, changed back to the first idea the filled center wasn't turning out as expected.
|
03-26-2024, 10:37 PM | #3 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
A little more progress dash extension is mostly complete, a few little touch up things needed the cubbies are not mounted at the top yet, all the welding is finished on the dash extension, assembling the rear suspension spaced the trailing arms back 1" and few other things tidied up. Getting closer to the finish line.
|
03-26-2024, 10:50 PM | #4 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
AC vents finished, and working on power door locks have a proto type ready, next is to figure out how to get the power door actuator to operate the door lock/un-lock
|
04-07-2024, 03:22 PM | #5 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
All the body panels are out for sand blasting and an epoxy coating, the rear end is installed and the front crossmember is removed for a new front cross member and suspension.
|
04-14-2024, 12:18 AM | #6 |
Registered User
Join Date: Apr 2009
Location: Dawson, Ga
Posts: 490
|
Re: 65Custom Build Thread
fitting the front crossmember in it's new home, will be relocating it forward around 1 inch to help center the tire in the wheel well. This should also give the truck a better ride with the rear also shifted back 1 inch and the front crossmember forward 1 inch with a new 117 inch wheel base an overall 2 inch gain, should help get some more weight off the front and give the truck a better weight bias.
|
Bookmarks |
|
|