CA 1972 GMC Step-side - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kwlskid · 01-22-2024, 10:46 PM

****SOLD****SOLD****
I am selling my (my grandfathers), 1972 GMC, 1/2 ton, 4x2, step-side, short bed truck, c10
Clean Title in hand.
****SOLD****SOLD****
It is rusty along the cab rain gutter and bottom of cab. It has a ZZ4 motor from around (2000) with about 100K miles on it, backed up with a rebuilt turbo 350 from the same time. I was young a dumb and put a 750CC carb on it, jetted down as far as it can be, so it runs good but doesn’t jump off the line like it should because it is a bit too much fuel off the line with a heavy foot. Other than having to be gentle with the gas off the line it runs great and I trust it to be reliable mechanically. The front end suspension is in need of TLC but is still in alignment and fully functional, just squeaky and creaky. It has rear leaf springs and a 12 bolt rear end. The wood in the bed is in need of replacement and the truck needs some love but it is 90% there and relatively unmolested.
****SOLD****SOLD****
I’ll be taking the Knaack box off the back of it but the chrome tool box will stay with the truck.
****SOLD****SOLD****
And I have extra parts including the motor I pulled out of it when I put in the ZZ4, which was built by S and S motors in San Leandro for my grandfather at some point, that was one hot motor and I have no reason to believe that motor couldn’t be rebuilt: 010 block, performance heads, cam, crankshaft, distributor, intake, etc.
****SOLD****SOLD****
I also have misc. parts including old smog parts and stuff. I’d like the buyer to take all the parts with the truck so I don’t have to mess with them.
****SOLD****SOLD****
I’m asking XXXXX but am open to offers.
****SOLD****SOLD****
I have created a public album in my profile.
I have also added photos below, scroll down to view.

**68bowtie** · 01-22-2024, 11:49 PM

Use the go advanced button to start a reply then click the paper clip (attachment) button and follow the prompts. You have to keep it to 1 or 2 pics at a time if the file size is large.

kwlskid · 01-22-2024, 11:56 PM

Here’s a few photos, there are more in my public photo albums.
Thanks for taking a look!

kwlskid · 01-22-2024, 11:57 PM

Thank You!! 68bowtie !

Shifty One · 01-23-2024, 10:30 AM

If you were closer, it would be mine....very nice truck, GLWS!

**michael bustamante** · 01-23-2024, 11:51 AM

yeah that is a nice truck

**Tmend** · 01-24-2024, 02:09 AM

Id like to buy this pending some additional photos please. Private message sent

nightglide · 01-24-2024, 09:56 AM

PM sent

**57NAPCO** · 01-24-2024, 05:08 PM

I’d buy that truck…at the price you’re asking.

01-22-2024, 10:46 PM	#1
kwlskid Registered User Join Date: Mar 2010 Location: Castro Valley, Ca Posts: 12	1972 GMC Step-side **SOLDSOLD I am selling my (my grandfathers), 1972 GMC, 1/2 ton, 4x2, step-side, short bed truck, c10 Clean Title in hand. SOLDSOLD It is rusty along the cab rain gutter and bottom of cab. It has a ZZ4 motor from around (2000) with about 100K miles on it, backed up with a rebuilt turbo 350 from the same time. I was young a dumb and put a 750CC carb on it, jetted down as far as it can be, so it runs good but doesn’t jump off the line like it should because it is a bit too much fuel off the line with a heavy foot. Other than having to be gentle with the gas off the line it runs great and I trust it to be reliable mechanically. The front end suspension is in need of TLC but is still in alignment and fully functional, just squeaky and creaky. It has rear leaf springs and a 12 bolt rear end. The wood in the bed is in need of replacement and the truck needs some love but it is 90% there and relatively unmolested. SOLDSOLD I’ll be taking the Knaack box off the back of it but the chrome tool box will stay with the truck. SOLDSOLD And I have extra parts including the motor I pulled out of it when I put in the ZZ4, which was built by S and S motors in San Leandro for my grandfather at some point, that was one hot motor and I have no reason to believe that motor couldn’t be rebuilt: 010 block, performance heads, cam, crankshaft, distributor, intake, etc. SOLDSOLD I also have misc. parts including old smog parts and stuff. I’d like the buyer to take all the parts with the truck so I don’t have to mess with them. SOLDSOLD I’m asking XXXXX but am open to offers. SOLDSOLD** I have created a public album in my profile. I have also added photos below, scroll down to view. __________________ Kwlskid 1972 GMC stepside C1500 1982 GMC fleetside C2500 Last edited by kwlskid; 01-28-2024 at 09:43 PM. Reason: Adding info

01-22-2024, 11:49 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,748	Re: 1972 GMC Step-side Use the go advanced button to start a reply then click the paper clip (attachment) button and follow the prompts. You have to keep it to 1 or 2 pics at a time if the file size is large. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

01-22-2024, 11:56 PM	#3
kwlskid Registered User Join Date: Mar 2010 Location: Castro Valley, Ca Posts: 12	Re: 1972 GMC Step-side Here’s a few photos, there are more in my public photo albums. Thanks for taking a look! Attached Images __________________ Kwlskid 1972 GMC stepside C1500 1982 GMC fleetside C2500

01-22-2024, 11:57 PM	#4
kwlskid Registered User Join Date: Mar 2010 Location: Castro Valley, Ca Posts: 12	Re: 1972 GMC Step-side Thank You!! 68bowtie ! __________________ Kwlskid 1972 GMC stepside C1500 1982 GMC fleetside C2500

01-23-2024, 10:30 AM	#5
Shifty One Registered User Join Date: Dec 2014 Location: Tucson, AZ Posts: 732	Re: 1972 GMC Step-side If you were closer, it would be mine....very nice truck, GLWS! __________________ 1987 V20 farm-hand rescue 1998 C2500 lot-rot rescue

01-23-2024, 11:51 AM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,857	Re: 1972 GMC Step-side yeah that is a nice truck __________________ 1967custom

01-24-2024, 02:09 AM	#7
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,299	Re: 1972 GMC Step-side Id like to buy this pending some additional photos please. Private message sent __________________ Some progress is better then no progress Last edited by Tmend; 01-24-2024 at 02:48 AM.

01-24-2024, 09:56 AM	#8
nightglide Registered User Join Date: Sep 2007 Location: Calgary, Alberta, Canada Posts: 35	Re: 1972 GMC Step-side PM sent

01-24-2024, 05:08 PM	#9
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,230	Re: 1972 GMC Step-side I’d buy that truck…at the price you’re asking.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.