Wiring Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BadBowtie · 08-20-2004, 10:32 PM

Does anyone know were I can get wiring diagrams for a 67 C10 without buting the damn book. Or can send me some copies. Any help would be nice

Fred T · 08-20-2004, 11:42 PM

Try this link over to Piston's board.
http://www.myoldtruck.com/photopost/...y.php?cat=3036
If that doesn't get you there go to www.myoldtruck.com and look under help articles.

Longhorn Man · 08-20-2004, 11:55 PM

What you tryin to figure out? There's a few of us that are kinda familiar with wires just by color and location.

BadBowtie · 08-21-2004, 03:06 AM

Thanks for the help guys. I realy need to know the taillights. I bought my truck off a farmer, The truck is a 67' and the bed is a 71'. The tail lights weren't hooked up. So I need to hook up the brake lights back up and side markers. Also I want to hook up a push button starter and need to know what wires I need to splice to do this. Thanks

Longhorn Man · 08-21-2004, 06:12 AM

Your brakes will be a yellow and a dark green...I can't remember which side is which, if you get it backwards, your turn signals will be backwards. Your parking lights and side markers are on a brown wire, but I wouldnt bother on the markers, they are not required.
As for your push button starter, all you need to do is run a good size wire (I dont know wire guages) to the bush button, and then from the button to the s terminal on your starter. There should be a purple wire there right now.

BadBowtie · 08-21-2004, 06:26 AM

Thanks Longhorn. On the push button starter do you mean just splice into the purple wire?

08-20-2004, 10:32 PM	#1
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Wiring Help Does anyone know were I can get wiring diagrams for a 67 C10 without buting the damn book. Or can send me some copies. Any help would be nice

08-20-2004, 11:42 PM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Try this link over to Piston's board. http://www.myoldtruck.com/photopost/...y.php?cat=3036 If that doesn't get you there go to www.myoldtruck.com and look under help articles. __________________ Fred There is no such thing as too much cam...just not enough engine.

08-20-2004, 11:55 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	What you tryin to figure out? There's a few of us that are kinda familiar with wires just by color and location.

08-21-2004, 03:06 AM	#4
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Thanks for the help guys. I realy need to know the taillights. I bought my truck off a farmer, The truck is a 67' and the bed is a 71'. The tail lights weren't hooked up. So I need to hook up the brake lights back up and side markers. Also I want to hook up a push button starter and need to know what wires I need to splice to do this. Thanks

08-21-2004, 06:12 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Your brakes will be a yellow and a dark green...I can't remember which side is which, if you get it backwards, your turn signals will be backwards. Your parking lights and side markers are on a brown wire, but I wouldnt bother on the markers, they are not required. As for your push button starter, all you need to do is run a good size wire (I dont know wire guages) to the bush button, and then from the button to the s terminal on your starter. There should be a purple wire there right now.

08-21-2004, 06:26 AM	#6
BadBowtie Registered User Join Date: Aug 2004 Location: Jamestown Indiana Posts: 22	Thanks Longhorn. On the push button starter do you mean just splice into the purple wire?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.