![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Junior Member
![]() Join Date: Apr 2021
Location: Santa Cruz, NM
Posts: 95
|
Re: Need guidance on 700r4 swapped transmission issues
The actual distance between the torque converter and flex plate is not of concern because it should be shimmed. What is important is how much the torque converter comes out of the pump, and that should be about 1/8". In one of the linked videos the guy says 1/8 to 3/16", in the other video the guy says 1/16 to 1/8".
https://www.youtube.com/watch?v=afzBif5snOg https://www.youtube.com/watch?v=efjVRicuFrA As can be seen in this 2nd video, an incorrectly set torque converter can eat up a pump in a short amount of time. |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
700r4 |
|
|