Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-29-2024, 11:33 AM | #5 |
Junior Member
Join Date: Aug 2020
Location: Courtenay, BC
Posts: 55
|
Re: Performance Online Aluminum Tank Issue
For tightening the hose clamps, the narrow board in the middle is not fastened down yet so it was easy to tighten the clamps. The hardest part of this exercise was keeping aluminum filings out of the tank while I zipped 1/2” off the top! I used painters tap. First put several strips down the tube, then put a couple sticky side up after that. Worked like a charm.
|
Bookmarks |
|
|