The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > Trucks For Sale

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-02-2024, 06:24 PM   #1
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,346
1954 5 window for sale

I am selling my 54 project truck, clean Texas title. You can go see the work that's been done on my thread, "My 54". I have both the 54 front clip and a 47.2-53 front clip. It has bedsides for the 54 and a Mar-K complete 47.2-53 bed, including white oak flooring still in the boxes. It comes with a 1985 S10 for a frame swap, but it has the original frame with a Camaro clip, so you could go with that and sell the S10. A ZR2 rear axle, wider, posi and discs comes with the S10. Both early doors (single glass window, Altman latches installed with the push button handles form a 52, so no droop) and the 54 doors (stock). Has the electric motor for the windows still in the box and lots of other parts, PM me if you are interested and I will get pictures of whatever you want.

$15,000 for the lot.
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 09-01-2024, 01:11 PM   #2
JDarby
Active Member
 
Join Date: Feb 2022
Location: PLANO, TX
Posts: 143
Re: 1954 5 window for sale

Pictures would really help with this one 8man!
__________________
1955.1 GMC 100 RestOMod
1972 T120RV
1967 C200 Trail 90
2014 TRD Quad CAB
JDarby is offline   Reply With Quote
Old 09-01-2024, 01:43 PM   #3
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,346
Re: 1954 5 window for sale

JDarby, if you are interested, let me know and I'll get whatever pictures you want.
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204
8man is offline   Reply With Quote
Old 09-10-2024, 11:13 AM   #4
8man
Senior Member
 
Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,346
Re: 1954 5 window for sale

IMG_1840 by Robert Moorman, on Flickr
I have the refinished stainless door trim, bumper shield, new bed side to running board pieces and brackets, and other stuff in this picture.
IMG_1841 by Robert Moorman, on Flickr
I smoothed the hood.
IMG_1842 by Robert Moorman, on Flickr
The one piece glass door windows are set up for power.

IMG_1843 by Robert Moorman, on Flickr
Rear fenders have been worked and are in good shape.

IMG_1844 by Robert Moorman, on Flickr
A set of running boards and one extra.

IMG_1845 by Robert Moorman, on Flickr
Complete MarK bed, wood, sides, self latching tailgate, front panel, strips.

IMG_1846 by Robert Moorman, on Flickr
2 sets of front fenders, the ones I was going to use and a spare set, 2 sets of inner fenders and the original 54 front fenders and bed sides are up here, all goes.

IMG_1847 by Robert Moorman, on Flickr
New firewall, new floor, heavier steel than original, with some square tubing bracing underneath. The PO had cut the radio space out, so I was preparing it for a newer radio with the screen.

IMG_1848 by Robert Moorman, on Flickr
I also have an original dash if you want to convert to that. Two of the S10 cab mounts shown, and the back wall has a couple of extra braces added to help secure the rear panel.

IMG_1849 by Robert Moorman, on Flickr
Cab mounts and an under dash ac addition (upside down). The 48 has the Vintage Air plastic one, so I built the steel one so I wouldn't need the plastic.

IMG_1850 by Robert Moorman, on Flickr
Bear claw latches, welded in so they will finish out properly.

IMG_1851 by Robert Moorman, on Flickr
Catch with the body filled in to smooth it out.

IMG_1852 by Robert Moorman, on Flickr
Top side of the under dash vent holder.

IMG_1853 by Robert Moorman, on Flickr
Patch panel and some other welding. The door gaps are good.

IMG_1854 by Robert Moorman, on Flickr
Cab corners replaced.

IMG_1855 by Robert Moorman, on Flickr
Gas filler hole filled.

IMG_1857 by Robert Moorman, on Flickr
Extra parts to go with it all.

IMG_1858 by Robert Moorman, on Flickr
47-53 grill and other parts to go with it.

IMG_1859 by Robert Moorman, on Flickr
More parts to go with it, except the Jeep grill and light rings at the top of the pic.

IMG_1860 by Robert Moorman, on Flickr
I welded in the cowl vent, but in one of the previous pics, you can see two vent assemblies if you want to cut out the patch and put one in.

The 2 54 doors with the vent windows are included as well.

If you have any questions, let me know. Located in Bryan, TX
__________________
8man-aka Robert
1948 on a S10 Frame, small block with a carb
1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD
Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL]
[/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204

Last edited by 8man; 09-10-2024 at 02:53 PM.
8man is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com