65 K10 Shock Absorbers? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67JimmyMO · 05-10-2024, 03:38 PM

Finally got around to installing the front shocks on my 65 K10.

Pretty much a bolt-on, had no alignment issues with the bolt holes.

I stacked a few washers between the frame and the top end of the shock to fill the gap and make it stand off the approximately 1/2" as the stock shocks do.

As you can see in the pics I used the Monroe 34944s, was glad to see that they are still made in the USA.

Going to do some more study before I pull the trigger on the back shocks, but will update this thread when I do.

05-10-2024, 03:38 PM	#1
67JimmyMO Registered User Join Date: Jun 2014 Location: Southwest MO Posts: 108	Re: 65 K10 Shock Absorbers? Finally got around to installing the front shocks on my 65 K10. Pretty much a bolt-on, had no alignment issues with the bolt holes. I stacked a few washers between the frame and the top end of the shock to fill the gap and make it stand off the approximately 1/2" as the stock shocks do. As you can see in the pics I used the Monroe 34944s, was glad to see that they are still made in the USA. Going to do some more study before I pull the trigger on the back shocks, but will update this thread when I do. Attached Images __________________ 1967 GMC SWB 383 Stroker w/Saginaw 4sp 1979 Chev C30 Scottsdale Flatbed 350 4sp 2000 Chev 3500 Flatbed 454 Automatic 1978 GMC 6500 Flatbed Dump 366 5sp + 2sp 1965 Chev K10 LWB 230 4sp 1985 Chev K30 Flatbed 350 4sp



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.