60-62 V8 throttle linkage

[AcampoDave]

Originally Posted by 62 Barnfind

Im in the middle of a V8 swap. What can I use for the throttle linkage? I still want to use the original pedal assembly but the adjustment rod on the end is to short. I found a 63-66 throttle pivot not sure it will work with the 60-62. Any advice would be helpful.

As long as it's for a V/8 I would try it. I like the stock set-up as long as the rod holes aren't wollowed out, they work well. Probably a few more availble these days with all the LS motors going in.