67 Camaro Build

[7dee2]

While the car was gone it was time for some lift maintenance. Look what showed up, a brand-new ram for our old 4-post. Apparently, I contaminated the old cylinder after enclosing the lift and using it as a paint booth (Seemed like a good idea at the time! ). http://67-72chevytrucks.com/vboard/s...&postcount=438

Or perhaps it was sandblasting stuff in the proximity either way it developed a pretty good leak and couldn’t reach the highest setting. When we moved the lift this last time, I sent the cylinder out to be repacked. It came back better but still leaked a bit, they told me the inner rod was damaged on one end so the top setting was still an issue. Decided to pull the trigger for a new ram before I could no longer get a replacement for the extra long, extra tall Eagle.

Upholstery update, Mike has the headliner in and it looks great! He’s still working on the other stuff but is close to wrapping that up also.

At the same time, I’ve decided I need to change out the lower alternator bracket on our good-to-go 511. Here are some BBC short water pump alternator lower bracket differences (circled). The idea is to move the alternator forward to give more room for the taller M/T valve cover setup. This bracket will swap belts front to rear (alt. belt in front, water pump belt in back) it also changes the upper bracket to mount to the rear instead of the front of the alternator. It is the correct bracket for an early 396/427 with a short pump and manual steering.