Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-26-2024, 08:41 AM | #1 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,582
|
Re: 65 Fairlane pro-touring build
Nice work Vic, coming along nicely
I may be getting closer to my panel bond step
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
06-27-2024, 02:42 PM | #2 | |
Senior Member
Join Date: Mar 2012
Location: Kansas City, MO
Posts: 2,018
|
Re: 65 Fairlane pro-touring build
Quote:
The fuel tank cover is taking shape. I have the fuel filler and access panel openings cut. I used a 2.5" hole saw to make the first cut and then a 3" hole template to fix the location more precisely. From there I took measurements for the access panel, drilled the corner holes and then used the metal death wheel to connect the dots. By the time I got to the last cut, the edge of the wheel was loading up with metal and I got a little heat on it, but not enough to mess anything up. If you don't recall my strategy for the filler cap, I made a split ring surround on the lathe / mill that will slip under the filler cap assembly. I needed to do that so I can clamp the hose before putting the fuel tank in because I don't have enough room to do it after the fact. The filler assembly has just enough clearance to go thru the cover. Once in place, I'll put the split halves together to hold it all in place. I'll post photos of that step in a day or two. .
__________________
Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas |
|
Bookmarks |
Tags |
ford, restomod, t56 |
|
|