65 Fairlane pro-touring build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Vic1947** · 06-27-2024, 02:57 PM

Quote:

Originally Posted by mongocanfly

Looking great Vic....as usual..!!

Thanks, Greg, I always appreciate your input!

**Vic1947** · Yesterday, 04:19 PM

The fuel tank cover is complete except for gluing it in. I used a little homemade dimple die to recess the spots where the rivet nuts go. That lets the fuel filler assembly sit flat on the surface. On the access panel, I used cork gasket material to seal the edges instead. Works great and a lot less hassle.

.

Yesterday, 04:19 PM	#2
Vic1947 Senior Member Join Date: Mar 2012 Location: Kansas City, MO Posts: 2,002	Re: 65 Fairlane pro-touring build The fuel tank cover is complete except for gluing it in. I used a little homemade dimple die to recess the spots where the rivet nuts go. That lets the fuel filler assembly sit flat on the surface. On the access panel, I used cork gasket material to seal the edges instead. Works great and a lot less hassle. . Attached Images __________________ Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.