Re: 67 Grill Molding source
Be careful when you're installing those clips on the trim rings, the trim metal is thin and when you put the clips in place and twist you can crease the trim, it was a bit tight I used a plastic pry just lightly for the clips to twist in place, don't over twist or it will push up on the tin trim and make the outward dimples show on the trim. I made that mistake on the first to clips as I mentioned the clips were tight to twist in place. I would suggest starting with the bottom trim ring at the bottom of the ring first. My original bow tie does not fit in the trim properly, doesn't seem to have quite the same original contour. The Corvex headlight trim I did not used, shine and fit not to my liking.
|