1964 C10 fleet side swb

[Justin71105]

Yeah thats how I am used to installing them as well.

I just think these are too much of a drop, they are still moving in the pockets even clocked correctly on bottom or top.

I believe when I hit some pot holes or bunps and the suspension raises the springs are just moving around in there loose.

Either going to get some 2" drop coils or find an isolator that fits. Pretty sure these are 3" coils, with the frame jacled up I can spin them slightly before they catch.

When they uncompress on a bump they could be moving all around.

Also thought about using a j bolt to cinch them down. There is a hole right inside the lower pocket to put it in.

-- Picked up some J hooks and habe both coils locked down, will mark the coils and see tomorrow if they are still able to rotate.