![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
![]() Join Date: Mar 2006
Location: Pittsburgh, PA
Posts: 252
|
Re: Need help on mounting door handles
I had a similar experience installing the handle on the passenger side. I had an original template and lined it up the way I thought was correct, drilled and then found out the holes didn't line up. What I did was put a couple of bolts through the captive nuts from the backside and let them protrude slightly towards the door panel. A dab of grease on the ends of the bolts and then installed the door panel with a couple of the top screws. This gave me a couple of grease marks on the inside of the panel as a guide for drilling the holes. Hope this helps!
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: Need help on mounting door handles
BHAP,
Yes, I'll do that, I've used that method before with sheetrock and an electrical box, only with lip stick. I forgot, THANKS!!!
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
![]() |
![]() |
![]() |
Bookmarks |
|
|