Edelbrock carb bracket recommendations

[Dead Parrot]

On my 75 with a Performer intake and 1405 Eddy, I used the factory throttle bracket from the old Q-jet setup. Same for the trans shift cable.

[3x2GTO]

Originally Posted by Dead Parrot

On my 75 with a Performer intake and 1405 Eddy, I used the factory throttle bracket from the old Q-jet setup. Same for the trans shift cable.

My trucks is a manual, but does have the original auto trans shift cable bracket on it, which also serves as a bracket for the PB booster line and for the factory spark plug loom to clip into. My original Q jet throttle bracket is about an inch to narrow to hit the studs on the Eddy carb.