Pulley alignment help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RustyPile · Yesterday, 11:34 PM

If it's only the power steering pulley that misaligned, the P/S pump is improperly installed, perhaps a spacer or washer is missing.

The balancer must be installed "bottomed out" against the lower timing chain sprocket.. DO NOT "back it out".. If the other pulleys are misaligned with the balancer pulleys, something else is amiss. If everything aligned properly before you began your task, you made a mistake in the re-installation.

Yesterday, 11:34 PM	#5
RustyPile Registered User Join Date: Dec 2017 Location: Elkhart, Texas Posts: 1,661	Re: Pulley alignment help If it's only the power steering pulley that misaligned, the P/S pump is improperly installed, perhaps a spacer or washer is missing. The balancer must be installed "bottomed out" against the lower timing chain sprocket.. DO NOT "back it out".. If the other pulleys are misaligned with the balancer pulleys, something else is amiss. If everything aligned properly before you began your task, you made a mistake in the re-installation.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.