![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Mar 2015
Location: Manchester, CT
Posts: 433
|
Re: radiator w/electric fans upgrade questions
Here's how I chose to cool my LS swapped '89 (same basic truck as yours). I'm using a radiator for a 350 engine from Spectra Premium. It should fit your existing saddle mounts. For cooling fans, I did some boneyard scrounging and found that a V6 Chrysler Sebring fan assy. will cover the radiator core nicely. To hold the radiator in place, I bought a new upper shroud and cut it so that all that was left was the mounting saddles for the upper radiator, and the mounting surface for the core support. How you choose to trigger your fans on/off will depend on your engine choice. I'm using the LS PCM and relays to turn my fans on/off. You gotta be careful with the aftermarket aluminum radiators, as they are not noted for longevity. Corrosion is another concern with them
Last edited by LeesTruk; 07-28-2024 at 08:02 AM. |
![]() |
![]() |
![]() |
#2 | |
Registered User
Join Date: Mar 2013
Location: Fostoria,OH
Posts: 76
|
Re: radiator w/electric fans upgrade questions
Quote:
__________________
my reaction when i realized the true condition of my truck? 3 words...un..... ![]() |
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2015
Location: Manchester, CT
Posts: 433
|
Re: radiator w/electric fans upgrade questions
The fan assy. is from an '08 Chrysler Sebring with either a 2.7 or 3.5 V6. Cost me all of $35. You can get a new fan assy from Rockauto (TYC# 621570 or Four Seasons #76103). If you're handy with fabrication, it's easy to mount the fan assy to the radiator after you cut the mounting ears from the sides of the housing. I don't know what the amp draw is, but my 130 amp alternator doesn't seem to have a problem. The volt meter doesn't show much, if any voltage drop when the fans turn on, and they are very quiet, unlike the aftermarket fans. Also I don't have any heat related issues with the engine, even on the hottest days so far (temps have been in the 90's to 100+, unusually warm here in New England). I've also used a fan assy from a Ford Windstar for my last LS swap into a Squarebody. That worked well also, but the housing is larger, depthwise, than the Chrysler unit
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2015
Location: Las Vegas NV
Posts: 364
|
Re: radiator w/electric fans upgrade questions
I have to disagree about higher amp alternator. I have a 150A and no issues. Dual 16” spal fans, 34” core aluminum radiator, pcm controlled dual speed. Fans push 2024 cfm each.
I will say from experience that these ebay and Amazon fan kits are subpar. Look at the cfm spec. Also the motors rarely last past 1-2 years. Don’t skimp on the wiring. Cheap is not the goal here for your cooling system or you’ll regret it.
__________________
Customization is what you want it to look like -- not what other people think it should look like |
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Jan 2006
Location: Big Pine Key, FL
Posts: 752
|
Re: radiator w/electric fans upgrade questions
Quote:
__________________
Mike |
|
![]() |
![]() |
![]() |
#6 | |
Registered User
Join Date: Mar 2013
Location: Fostoria,OH
Posts: 76
|
Re: radiator w/electric fans upgrade questions
Quote:
considering that i may do a V8 swap in the future i still feel like i should at min upgrade to a larger rad now, so i wont have to later. so after research and great advise from you guys im leaning towards 2 options; up my budget to something like this cold case setup https://www.summitracing.com/parts/r...1500/year/1993 or a more budget friendly, less complicated upgrade would be a fair priced 34" aluminum rad and an og fan shroud, and stick with my clutch fan.
__________________
my reaction when i realized the true condition of my truck? 3 words...un..... ![]() |
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2013
Location: Fostoria,OH
Posts: 76
|
Re: radiator w/electric fans upgrade questions
for anyone following this, this is what I decided on was an all aluminum 2 row V8 rad I found on ebay for $135, and a V8 fan shroud to go with it. The only "issue" is that the fan is now like 6" away from the shroud. So naturally sitting at idle on a hot day the temp did get up to around 210 after about 15 min. Cruising around town at even 30-35 mph it's fine, and above 50 mph it runs even cooler that it did with the old rad. Last weekend the wife and I made an estimated 800 mile round trip to IN for the Hoosier GM truck rally with no overheating issues. Even though it is mostly fine the way it is I do plan on installing an extension on the fan shroud and a short spacer on the fan so that there aren't issues during the rare occasion of sitting in traffic.
__________________
my reaction when i realized the true condition of my truck? 3 words...un..... ![]() |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Mar 2013
Location: Fostoria,OH
Posts: 76
|
Re: radiator w/electric fans upgrade questions
Quote:
__________________
my reaction when i realized the true condition of my truck? 3 words...un..... ![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|