3/4 Ton Long to Short & Static Drop Square One - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kitsbeach** · Today, 12:22 AM

BUT...I also knew that the chance of me getting the zigzag cuts perfect would be near impossible.

The zigzag cuts are the most popular on this site and all over the internet, but that means 6 different cuts ON EACH SIDE. Getting them to match up perfectly would be difficult.

So I settled on nice big strong fishplates, with a good design, along with straight cut frame cuts.

Name: wrong better best fishplate design.jpeg
Views: 3
Size: 43.6 KB

Name: wrong better best fishplate design.jpeg
Views: 3
Size: 43.6 KB

Basically wrong on the frame cuts and best on the fish plates.

Today, 12:22 AM	#10
kitsbeach Senior Member Join Date: May 2014 Location: Vancouver, BC Posts: 494	Frame cuts and fish plates BUT...I also knew that the chance of me getting the zigzag cuts perfect would be near impossible. The zigzag cuts are the most popular on this site and all over the internet, but that means 6 different cuts ON EACH SIDE. Getting them to match up perfectly would be difficult. So I settled on nice big strong fishplates, with a good design, along with straight cut frame cuts. Basically wrong on the frame cuts and best on the fish plates. __________________ Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.