turbo 400 kickdown switch

[dooguy]

Originally Posted by kwmech

The mount has different holes in it for the switch. Finer adjustment in the past I have put a piece of hose around the tip that sticks out

i am not seeing any adjustment in the mount. switch can only fit in one position. I have seen different posts that say you need to reset switch and then depress accelerator to self position, but i have had no luck trying the suggested reset methods.

I'm thinking like you said putting something over tab that sticks out

[LockDoc]

-
Here is the one I have. I see no adjustment in the bracket or switch. There are three holes in the bracket, two of them are for locator tabs on the switch and one is for the screw.

The instructions for adjustment you are reading are for the TH350 kickdown CABLE. I don't know if any of the 400's use that system or not. That adjustment will not work for the electric switch.