Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-30-2024, 12:10 PM | #1 |
Active Member
Join Date: Feb 2022
Location: PLANO, TX
Posts: 128
|
Cruise Control
How hard is it installing Cruise Control?
I plan on driving my truck a lot when it is completed and I do enjoy my cruise control when I am driving!! It is one option I have never installed, Thanks
__________________
1955.1 GMC 100 RestOMod 1972 T120RV 1967 C200 Trail 90 2014 TRD Quad CAB |
07-30-2024, 03:01 PM | #2 |
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,679
|
Re: Cruise Control
What are your plans for the truck? I have the Rosta Global Cruise on TRUK and like it. TRUK has EFI and a 700r4. You plan on EFI?
__________________
cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer |
07-30-2024, 06:25 PM | #3 |
Active Member
Join Date: Feb 2022
Location: PLANO, TX
Posts: 128
|
Re: Cruise Control
EFI, yes ....6.0LS with 480LE on a C4 Corvette FlatOut Suspension.
Getting real close having most all issues sorted out and I am Stoked!! Why I asked about Cruise Control, thanks for the response Ogre.
__________________
1955.1 GMC 100 RestOMod 1972 T120RV 1967 C200 Trail 90 2014 TRD Quad CAB |
07-30-2024, 08:06 PM | #4 |
Registered User
Join Date: Nov 2013
Location: Show Low, Arizona
Posts: 770
|
Re: Cruise Control
Is your throttle drive-by-wire or a conventional cable?
If it is DBW, it is a 4 wire connection to your TAC module. You'll need to supply it with a brake signal in one of those four wires. The other three go to switches for enable, resume and accelerate IIRC. Dakota Digital will sell you a TAC module and switch for about $500 for the DBW. I bought mine at a junkyard for a few bucks. There's several different GM TAC modules so you'll need to research which one is compatible with your PCM Make sure you snag the TAC module harness with the box if you go the junkyard route. If it is a cable throttle body, you'll need a VSS from your transmission to either the PCM or the firewall throttle servo, I don't remember which. You'll need the same wiring for enable, resume and accelerate. Your throttle body has places for two cables already, Lokar makes a nice cable holder for the ls intake with provisions for two cables - cruise and throttle Youtube is your friend and there's a few videos and schematics how to set them up. Last edited by e015475; 07-30-2024 at 08:14 PM. |
Bookmarks |
|
|