What did you do to your truck today.The 3rd chapter

[72c20customcamper]

New shift shaft seal on the th350 . I had this rebuilt about two years ago either they used a cheap seal or never replaced it . The rubber was hard as a rock . The PMD products puller worked flawlessly . Took about 10 minutes start to finish the silver tool is the seal driver .

[Jiggers72-GMC]

Well done Mark, my guess is they never replaced the seal before ........

[72c20customcamper]

Originally Posted by Jiggers72-GMC

Well done Mark, my guess is they never replaced the seal before ........

Thanks the tool makes it super easy

Drove it about 20 miles today . Not a drip to be found I’ll check it again in the morning

[Rust_never_sleeps]

I finally remembered to put a 4A fuse in my ammeter. Better take the rest of the week off now ;-)

[hdrolling]

New valve covers, not a lot of options for center bolt vortec heads.

[72c20customcamper]

All loaded up for the Carlisle truck show swap meet not bringing much this time . Nice not having to worry about stuff getting wet out the new cover on

[Chevys4life]

Is the show this weekend?

[72c20customcamper]

Originally Posted by Chevys4life

Is the show this weekend?

Yes I believe to official start is Thursday for the swap meet and Friday Saturday for the show I get there Wednesday much easier to get set up without people walking around . I’m still debating whether or not I will tow out the 68 stepside

[Chevys4life]

Great.......thanks for the update Mark.

[72c20customcamper]

Originally Posted by Chevys4life

Great.......thanks for the update Mark.

Just finished setting up the tent on my spots

[Ol Blue K20]

Originally Posted by palf70step

nice!

x2

[Ol Blue K20]

Originally Posted by 72c20customcamper

All loaded up for the Carlisle truck show swap meet not bringing much this time . Nice not having to worry about stuff getting wet out the new cover on

If ya see Tim, tell him we miss him!

[Chevys4life]

Originally Posted by 72c20customcamper

Just finished setting up the tent on my spots

It looks like you have a nice spot there.

[72c20customcamper]

Originally Posted by Chevys4life

It looks like you have a nice spot there.

I have three spots . Usually it’s crowded up with the trailer and my other trucks to the point it’s a little hard setting up the tent . Last year I had three trucks here . Hope to have all 4 next year

[72c20customcamper]

Originally Posted by Ol Blue K20

If ya see Tim, tell him we miss him!

Will do if I see him

[hdrolling]

Test fit time, hopefully it will look as good as it does in my head.

[72c20customcamper]

Met up with Tim (Special-K )he’s doing well .

['68OrangeSunshine]

Originally Posted by 72c20customcamper

Met up with Tim he’s doing well .

Is that TIM who is ''Special K'' or TIM the Husky Guy?

[72c20customcamper]

Originally Posted by '68OrangeSunshine

Is that TIM who is ''Special K'' or TIM the Husky Guy?

Special-k sorry I should have been more specific

['68OrangeSunshine]

Originally Posted by 72c20customcamper

Special-k sorry I should have been more specific

Haven't heard much from Husky Tim in a long time. Do we reckon he's passed away?

[Peanut74]

Made a cover box for the wires coming out of the wire harness block on the fire wall. Got the hood ready for paint. Going to paint them today.
(If I post it I will be motivated to do it!! Getter done)

[Canuckvetter]

Originally Posted by 1967GMCC20

Need front sway bar, want OEM type for 67.

I used an 1-1/4” bar from a 1ton square body. Direct fit just need to order the bushings for the 1-1/4 bar. Tremendous upgrade in handling.

[Johnl48]

Added some bling

[68bowtie]

Shiny!

['68OrangeSunshine]

Originally Posted by Johnl48

Added some bling

Nice Bowtie.
Some years ago I looked into the possibility of using LEDs inside the blue lens on the 69/70 Emblem. It's do-able, but I don't have a truck to put it on. Just the spare hood.