Amp Research Powerstep - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SeventyOne · 06-03-2024, 08:14 PM

Quote:

Originally Posted by Blazerowner

One thing to note the wiring is grounded together for the interior lights. I had to cut the ground from the right side to stop both steps from coming down with one door open.

That's what the diodes are for that HB provides. But I guess you found another way to do it?

**Blazerowner** · 06-03-2024, 08:57 PM

No I used the diodes and still had the issue. I was wondering why that didn’t work. I just eliminated the bridged ground and I think that solved the problem. Edit - I see I installed them wrong now. Oh well not a big deal. I might fix them later.

**Blazerowner** · 06-04-2024, 10:16 PM

Fixed the wiring. Now it works as it should.
I trimmed my inner fenders. Used an air body saw. Came out pretty good. I just need some touch up paint and see if they clear.

SeventyOne · 06-05-2024, 12:28 PM

Quote:

Originally Posted by Blazerowner

I trimmed my inner fenders. Used an air body saw. Came out pretty good. I just need some touch up paint and see if they clear.

Looks good. I dont have access to an air saw so i'll have to finesse it with my grinder/cut off wheel and maybe use a drill bit to radius the corners.

**Blazerowner** · 06-05-2024, 03:24 PM

Highly recommend the air saw if you can buy one but the cut off wheel and grinder will work. Its hidden so it doesn’t have to be pretty.

**Piratenation** · 08-04-2024, 01:03 PM

Quote:

Originally Posted by Blazerowner

I agree the work is nice. The brackets seem to be either laser or water jet cut. They are nice and I haven’t had fitment issue on the truck. I’m hoping I have the right brackets but FedEx is running late so I may not know until tomorrow which motors I have. Any chance you can grab a picture of where you had to trim the rocker box?

How much did the amp steps cost? Looking at buying the HB brackets but want to know what my all-in parts cost is gonna be. Don't need part number just price. Thanks

SeventyOne · 08-04-2024, 06:48 PM

Quote:

Originally Posted by Piratenation

How much did the amp steps cost? Looking at buying the HB brackets but want to know what my all-in parts cost is gonna be. Don't need part number just price. Thanks

like 1600ish

**Piratenation** · 08-05-2024, 11:42 AM

Quote:

Originally Posted by SeventyOne

like 1600ish

Thanks, I was thinking it was gonna be 1500ish.

06-03-2024, 08:57 PM	#102
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Re: Amp Research Powerstep No I used the diodes and still had the issue. I was wondering why that didn’t work. I just eliminated the bridged ground and I think that solved the problem. Edit - I see I installed them wrong now. Oh well not a big deal. I might fix them later. __________________ Kirk 72 Blazer CST 4wd highlander Last edited by Blazerowner; 06-03-2024 at 09:05 PM.

06-04-2024, 10:16 PM	#103
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Re: Amp Research Powerstep Fixed the wiring. Now it works as it should. I trimmed my inner fenders. Used an air body saw. Came out pretty good. I just need some touch up paint and see if they clear. Attached Images __________________ Kirk 72 Blazer CST 4wd highlander

06-05-2024, 03:24 PM	#105
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,954	Re: Amp Research Powerstep Highly recommend the air saw if you can buy one but the cut off wheel and grinder will work. Its hidden so it doesn’t have to be pretty. __________________ Kirk 72 Blazer CST 4wd highlander



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.