cup holder - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LNP · 07-11-2024, 02:05 PM

Quote:

Originally Posted by chewychevy67

So I'm curious if it will hit the ac duct hoses behind the dash because it sticks out so far from the back? I have a 67 ash tray so it may be a bit different.

I routed my ac hose over it. I have a 69 trk and ash tray

LNP · 07-11-2024, 02:32 PM

Quote:

Originally Posted by LNP

I routed my ac hose over it. I have a 69 trk and ash tray

I also wanna add the bracket is only a 1/2" longer than the Toyota cup holder is.

**Rust_never_sleeps** · 07-11-2024, 03:37 PM

I was astonished to find they're still making these things.
They ARE period correct, though ;-)

https://www.acehardware.com/departme...essories/89981

chewychevy67 · 07-11-2024, 04:38 PM

So the piece that you inserted the cup holder into is 3d printed? Cool

LNP · 07-11-2024, 04:55 PM

Quote:

Originally Posted by chewychevy67

So the piece that you inserted the cup holder into is 3d printed? Cool

Yes it is. My son made it and said if anyone is interested in one he can make them.

chewychevy67 · 07-11-2024, 11:15 PM

Could you post the measurements if that's not too much trouble. I would like to see if it will fitina 67 ashtray bracket

LNP · 07-12-2024, 10:08 AM

Quote:

Originally Posted by chewychevy67

Could you post the measurements if that's not too much trouble. I would like to see if it will fitina 67 ashtray bracket

No worries. Heres a couple photos so you can see the measurments and where I measured from.

**Rust_never_sleeps** · 07-12-2024, 05:16 PM

Quote:

Originally Posted by LNP

Yes it is. My son made it and said if anyone is interested in one he can make them.

Would he be willing to share the STL?

LNP · 07-12-2024, 05:22 PM

Quote:

Originally Posted by Rust_never_sleeps

Would he be willing to share the STL?

STL?? I'm not sure what that is so I cant say.

**Rust_never_sleeps** · 07-13-2024, 01:28 AM

Quote:

Originally Posted by LNP

STL?? I'm not sure what that is so I cant say.

sorry, STL is the CAD file the printer reads to make the part

**Richard** · 07-13-2024, 02:17 AM

The 3D printed slider is awesome. Have been working on my cup holder as well. I do not have one of those 3D printer gizmos or the knowledge to use it. I am doing it with basic materials available. Ash tray is modded and cup holder slides in and out. The tray length is a bit of an issue with the tray slider. Have a solution, just no time yet to implement the change. Hope to provide pics of another option soon.

LNP · 07-13-2024, 10:31 AM

Hate me if you want but I'm not gunna ask him to give it away free as I asked him to make this for me with the possiblity he could sell one or two. The one I am installing today the one I post the final pics of is the 5th version. Started with a smaller one and ended up with the size it is as thats what worked best with this particular cup holder. Each bracket he made took 16hrs to print. He sat at home at his desk with calipers and measured figure and created a 3d model from scratch then proceeded to print them out. the two pieces that attach to the cup holder itself so the face plate adapts was his own idea and design. He doesnt care if any sell he did this to help me. He took in to account that others had said they did not want to ruin thier original ash tray and designed this one to fit without ruinin it. Thats a lot of trail error and personal time. Please dont take me wrong I am just explaining after what he went thru to make this why I dont wanna now ask him to hand the program out. Then someone else will make them to sell.

LNP · 07-13-2024, 04:49 PM

Ok heres the finished product installed in my truck.

https://www.youtube.com/watch?v=sKs09OV3g3I

LNP · 07-13-2024, 06:51 PM

Quote:

Originally Posted by Richard

Have no idea where that came from? No hate here, said it was a good job. Never asked for a free one or even to buy one. I have no doubt he worked hard on it. I am doing it differently for reasons I stated.

I apoloize Richard;9327256 I clocked on the wrong post when I did my reply. Rust_Never_Sleeps had asked if he would share the cad file not you. Again I apologize. I tried to delete the post but cant see how. I did remove your quote from the post

**Richard** · 07-14-2024, 02:01 AM

Quote:

Originally Posted by LNP

I apoloize Richard;9327256 I clocked on the wrong post when I did my reply. Rust_Never_Sleeps had asked if he would share the cad file not you. Again I apologize. I tried to delete the post but cant see how. I did remove your quote from the post

No worries. I deleted my message as it quoted you and does not add anything useful. You have to click the delete in the lower section to eliminate the post. I will delete this if you would like. I would buy one of the 3d printed cases if price is reasonable. It is shorter than the solution I have, which I will still finish. Think you will need a premium membership to list it though.

LNP · 07-14-2024, 11:51 AM

Quote:

Originally Posted by Richard

No worries. I deleted my message as it quoted you and does not add anything useful. You have to click the delete in the lower section to eliminate the post. I will delete this if you would like. I would buy one of the 3d printed cases if price is reasonable. It is shorter than the solution I have, which I will still finish. Think you will need a premium membership to list it though.

I dont see where to delete the post I even clicked edit and looked. Maybe cause I am not a paying member yet I dont have the option.

**Rust_never_sleeps** · 07-14-2024, 02:30 PM

Quote:

Originally Posted by LNP

Hate me if you want but I'm not gunna ask him to give it away free

sure, totally fair

LNP · 07-14-2024, 03:05 PM

Quote:

Originally Posted by Rust_never_sleeps

sure, totally fair

Thanks you for understanding

1969stepside · 08-15-2024, 11:21 AM

so do we need that insert bracket for the toyota cup holder to work?

1969stepside · 08-15-2024, 01:23 PM

i ordered your sons insert does it come with the screws?

LNP · 08-15-2024, 01:41 PM

Quote:

Originally Posted by 1969stepside

i ordered your sons insert does it come with the screws?

The Toyota cup holder itself won't work without the bracket he makes or what someone else could do themsleves. If you dont have the cup holder when you order the bracket just order the cup holder included. The 4 screws needed for the stops (2) and to attach the ash tray front piece (2) come with it yes. Unless hes added it the #8- 32 x 3/4" screw and nut to attach the cup holder bracket to the ash tray bracket does not come with it.

1969stepside · 08-15-2024, 02:12 PM

i have the cup holder and i ordered his bracket

LNP · 08-15-2024, 05:09 PM

Quote:

Originally Posted by 1969stepside

i have the cup holder and i ordered his bracket

Oh ok. Cool I use mine daily and he's gotten lots of positive feedback so I am sure you will be happy with it as well

1969stepside · 08-16-2024, 09:15 AM

cant wait for it to show up so i can install it

LNP · 08-16-2024, 04:50 PM

Quote:

Originally Posted by 1969stepside

cant wait for it to show up so i can install it

I'm excited for you as well. He has a customer that sent him what he needs to make one for a 73 C-10.

07-11-2024, 03:37 PM	#53
Rust_never_sleeps Senior Member Join Date: Jun 2022 Location: San Ramon,CA Posts: 547	Re: cup holder I was astonished to find they're still making these things. They ARE period correct, though ;-) https://www.acehardware.com/departme...essories/89981 __________________ 1970 C10 Custom longbed 350/350

07-11-2024, 04:38 PM	#54
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,536	Re: cup holder So the piece that you inserted the cup holder into is 3d printed? Cool

07-11-2024, 11:15 PM	#56
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,536	Re: cup holder Could you post the measurements if that's not too much trouble. I would like to see if it will fitina 67 ashtray bracket

07-13-2024, 02:17 AM	#61
Richard Senior Member Join Date: Dec 1999 Location: Southern California Posts: 2,852	Re: cup holder The 3D printed slider is awesome. Have been working on my cup holder as well. I do not have one of those 3D printer gizmos or the knowledge to use it. I am doing it with basic materials available. Ash tray is modded and cup holder slides in and out. The tray length is a bit of an issue with the tray slider. Have a solution, just no time yet to implement the change. Hope to provide pics of another option soon. __________________ Richard 1972 K10 Custom Deluxe SWB Fleetside My build https://67-72chevytrucks.com/vboard/...d.php?t=800746

07-13-2024, 10:31 AM	#62
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 430	Re: cup holder Hate me if you want but I'm not gunna ask him to give it away free as I asked him to make this for me with the possiblity he could sell one or two. The one I am installing today the one I post the final pics of is the 5th version. Started with a smaller one and ended up with the size it is as thats what worked best with this particular cup holder. Each bracket he made took 16hrs to print. He sat at home at his desk with calipers and measured figure and created a 3d model from scratch then proceeded to print them out. the two pieces that attach to the cup holder itself so the face plate adapts was his own idea and design. He doesnt care if any sell he did this to help me. He took in to account that others had said they did not want to ruin thier original ash tray and designed this one to fit without ruinin it. Thats a lot of trail error and personal time. Please dont take me wrong I am just explaining after what he went thru to make this why I dont wanna now ask him to hand the program out. Then someone else will make them to sell. __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4 Last edited by LNP; 07-13-2024 at 06:52 PM.

07-13-2024, 04:49 PM	#63
LNP Registered User Join Date: Mar 2014 Location: Pekin, Illinois Posts: 430	Re: cup holder Ok heres the finished product installed in my truck. https://www.youtube.com/watch?v=sKs09OV3g3I __________________ Harley 1969 Chevy C-10 Long Bed, 350cid, 700R4

08-15-2024, 11:21 AM	#69
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: cup holder so do we need that insert bracket for the toyota cup holder to work? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-15-2024, 01:23 PM	#70
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: cup holder i ordered your sons insert does it come with the screws? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-15-2024, 02:12 PM	#72
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: cup holder i have the cup holder and i ordered his bracket __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

08-16-2024, 09:15 AM	#74
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,191	Re: cup holder cant wait for it to show up so i can install it __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.