Disk brake conversion

[custom10nut]

Originally Posted by LNP

I changed my 69 over to disc brakes from CCP and didnt have to change tie rods. I installed new spindles from them as well. First spindles were stock height then realizing I was an idiot for that day I ordered the drop spindles so I paid too much but did use the same tie rods on both sets.

Yes. I contacted CCP through Summit, and they confirmed this, also I like that the lugs are stock 7/16 size.(another kit I was looking at had 1/2 inch studs)
I’m going to order the conversion kit that has the spindles, rotors, calipers, etc.
I already have everything else (Booster, Master Cylinder, proportioning block, and all the lines), so it’ll be a pretty easy swap.
Now all I have to do is find the time to do it.