![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Active Member
![]() Join Date: Feb 2022
Location: PLANO, TX
Posts: 134
|
Cruise Control Options
What is the best type cruise control if your donor did not come with it?
My donor is a 2003 Express Van with a 6.0LS and an auto. Thanks in advance!
__________________
1955.1 GMC 100 RestOMod 1972 T120RV 1967 C200 Trail 90 2014 TRD Quad CAB |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,185
|
Re: Cruise Control Options
I think the answer will depend on how much work you want to do to integrate cruise with the ECM and wiring. There are aftermarket systems that will work independently of the OE computer. Those might be easiest option. Cruise units from some 90-94 ish GM vehicles can operate somewhat independently. Those units will use the OE speed and brake (and clutch pedal if equipped) signals. Other circuits include ignition power, ground, and the wires from the cruise switch.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Oct 2017
Location: New Castle, IN
Posts: 23
|
Re: Cruise Control Options
You might want to get in touch with Brendan over at lt1swap.com. He has years of experience with ls programming and wiring harness modifications. He might be able to steer you in the right direction. Rob
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2022
Location: Surrey BC
Posts: 805
|
Re: Cruise Control Options
That van would have had DBC throttle body. You'll need a servo motor off something.
this thread is probably a good starting point https://ls1tech.com/forums/conversio...ispreloading=1 If you are OEM manifold, computer and PCM, going to the wrecker and getting the cruise parts off any DBC LS truck is probably a good starting point. Get connectors too. Swapping to a DBW TB might be just about as easy except maybe for your gas pedal choice. |
![]() |
![]() |
![]() |
Bookmarks |
|
|