55.2-59 American autowire turn signal

[popeyestruck]

I'm wiring up my turn signals and trying to attach this yankee knockoff that came in a box with the truck. Anyone wired one of these to the AAW harness? I t didnt come with any instructions but I found a diagram online that says...
red- brake switch - I have a brake switch on the firewall under the pedal. is this the hot wire?
yellow left front turn
green -right front turn
brown - right rear turn
orange-left rear turn
blue and black to flasher relay then to switch feed but I have both flasher and hazard relays on the fuse block
The horn wire -black on the column will go to the black on the AAW harness

I'm I getting this right?
Thanks in advance

[mr48chev]

Most every wiring kit in existence uses a standard GM wiring color code system. The same colors that have been used since GM started using color coded plastic wire. That is a good thing because it really cuts down on confusion when wiring lights or starting system or what not.

I save every aftermarket turn signal switch wiring diagram I find here in my Photobucket albums
https://photobucket.com/u/mr48chev/a...6-c3c4d37a1b04

This might be it but can you post the photo of that page without the wiring on top of it so we can read it.

[popeyestruck]

I think the video shows how its done starting at 1:09 to 1:53. My fuse block has a flasher built in so it only allows 1 connection at the plug https://www.youtube.com/watch?v=1_YUxSkRXkU