1970 Chevrolet C20 Pickup - Motor Leaking Oil - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HO455** · 08-23-2024, 08:54 PM

Here is a primer on the crankcase ventilation system. If the system has leaks from bad seals and/or a defective PVC valve it can cause several problems including old leaks. The system is pretty simple and the cost to repair it is low.

https://www.mechanicaleducation.com/...ion-pcv-valve/

Basically low pressure is created in one valve cover so air flows from the breather on the other valve cover into the intake manifold through the PVC valve.

ggalv · 08-31-2024, 07:58 PM

Here is the latest on my connections to the valve covers. On the passenger side/front, I noticed that the hose was connected to basically a cap (2), I am assuming this is wrong? Can I put the hose on the passenger side (currently on 2) into the opening on the passenger side (1)? Attached are the pictures with (1) and (2) and also show the connections from the carburetor to the valve covers. Thanks

08-23-2024, 08:54 PM	#1
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,276	Re: 1970 Chevrolet C20 Pickup - Motor Leaking Oil Here is a primer on the crankcase ventilation system. If the system has leaks from bad seals and/or a defective PVC valve it can cause several problems including old leaks. The system is pretty simple and the cost to repair it is low. https://www.mechanicaleducation.com/...ion-pcv-valve/ Basically low pressure is created in one valve cover so air flows from the breather on the other valve cover into the intake manifold through the PVC valve. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

08-31-2024, 07:58 PM	#2
ggalv Registered User Join Date: Feb 2008 Location: Los Angeles, CA Posts: 35	Re: 1970 Chevrolet C20 Pickup - Motor Leaking Oil Here is the latest on my connections to the valve covers. On the passenger side/front, I noticed that the hose was connected to basically a cap (2), I am assuming this is wrong? Can I put the hose on the passenger side (currently on 2) into the opening on the passenger side (1)? Attached are the pictures with (1) and (2) and also show the connections from the carburetor to the valve covers. Thanks Attached Images Last edited by ggalv; 08-31-2024 at 09:18 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.