Classic Industries Steering wheel

[LockDoc]

Originally Posted by kwmech

The plastic piece centers the horn retainer. The holes in the contact plate are larger than the holes in the retainer. Nothing centers up correctly when all the holes are different sizes. I bought the whole kit from LMC Number 8 on page 133

The holes in the cup and the holes in the disk should be the same size.

Trust me, the plastic piece centers the metal disk.

Unless they have changed it the LMC catalog shows the horn parts in the wrong order of assembly.

Did you read post #7 in the thread I posted above?

Also check post #24 in this thread

https://www.67-72chevytrucks.com/vbo...d.php?t=426902
.