Factory ride height blazer

[THI]

I measured the front end - 23-1/2 inches from the center of the front axle to the bottom of the fender. This does have the 3 leaf HD spring rather than the 2 leaf stock but that should be minimal increase is height. If you need a back measurement, let me know.

I got a chance to measure the rear when it was not so dark out - the rear is 20-1/2 from center of axle to bottom of wheel well opening.

[waspp]

That's great thanks so much for the info! Now i can figure out what the PO did for a lift and take it from there. Winter project here i come.