47-55.1 old (member) new truck 1951 3100 deluxe

[yote1234]

Originally Posted by dsraven

I really recommend to check the dash to knuckle clearances before you cut down the column. personally I have had issues with some of the new vehicles because of how I grip the wheel etc. I am forever turning on the wipers or signals in some vehicles due to how close those switch levers are to the wheel. in an old international firetruck i used to operate the wheel was very close to the dash and sometimes my knuckles would drag on the dash panel. it wasn't just me who had this problem, just so you know.
to do a test run install a cardboard spacer on the dash that will space the dash outwards, parallel to the steering column, the amount you plan to shorten the column. then do a test run and see if your knuckles rub the cardboard.
the alternative could also be a shorter seat?

all great info and advice. again i thank you very much and will keep you updated . Dave