Heat/Sound Deadening Plan - Opinions?

[Bloodhound]

Originally Posted by Honest Bob

The install was quite a bit more time consuming that I thought it was going to be. A good pair of electricians wire cutters is the best thing to use to cut the holes in the carpet after poking through the bolt holes with an ice pick and making the x with a sharp knife. My scissors didnt cut it.

For carpet holes, I tried a trick I had read about a while back that worked awesome. I took an awl, heated it up with a torch, and passed it through the middle of the hole from underneath the cab through the carpet. Then I took an old socket, with whatever size hole I was trying to make, and heated it up and burned a hole in the carpet from above, centered on the awl. This made perfect holes in the exact right location, right through the carpet and the heavy backing material.