![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2017
Location: Wichita, KS
Posts: 61
|
HEI in 283?
I have a 67 C10 with a 283. It's not the original 283, but it looks to be mostly original configuration, except for an Edelbrock intake and 500cfm 4-brl. Is there any reason that makes it not possible to put in an HEI distributor? Good idea? Bad idea? pros? cons? Any particular brand?
Thaks for any advice |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: HEI in 283?
You can install an HEI on your 283. Recommend browse around on here for all the installation tips folks have provided over the years - things like full 12V, etc.
HEIs are a good idea because they eliminate the points (and therefore point wear, need to change/adjust every once in a while, etc) and are reliable (although I'd avoid overseas-made new ones - the best ones are the original GM HEIs - and some very reputable, but sometimes pricey, new U.S. made HEIs). The only con is non-original appearance. If that matters to you, you may want to consider a pertronix unit that also eliminates the points but fits under your current distributor cap. |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,287
|
Re: HEI in 283?
Why not? HEI will fit any SBC V8.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#4 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,449
|
Re: HEI in 283?
Same distributor fits big blocks, too. When the 305 I had in my '68 Skylark finally died, I went back to Buick power, and put that very distributor in my truck. There are some very early Corvettes ('50s) that I hear tell took a distributor with a longer driveshaft, but I've never seen one.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,221
|
Re: HEI in 283?
On some model trucks there are clearance problems with the firewall or air filter. Your 67 C10 is not one of them. I agree the factory HEI is the best one to use. They are easy to rebuild and clean up. If you replace any electronic parts use original equipment or name brands.
George |
![]() |
![]() |
![]() |
#6 |
At the body shop.
Join Date: Aug 2009
Location: Land of fruits and nuts.
Posts: 5,223
|
Re: HEI in 283?
Blob of cam break in lube on the gear wouldn't hurt
__________________
" That didnt make it any newer " " Dont antique the equipment " |
![]() |
![]() |
![]() |
Bookmarks |
|
|