![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
![]() Join Date: Aug 2010
Location: HSV, AL
Posts: 283
|
Wheel Backspacing With 73-87 Drop Spindles and QA1 Coilovers?
Running 15x8 (5x5 bolt pattern) rallies and wheels hit the QA1 lower control arm, barely scrapes the inside of the wheel right under the lip, with 1/4 spacer it clears. I believe a stock (non-dropped) spindle would clear.
Looking for wheels that will clear without a spacer. Anybody have QA1 upper and lower Control Arms and coil overs? What wheels are you using? 15x8 with 3.75" BS would work, but moves the wheels out. 17x8 or 18x8 with 4" BS should work. But looking at 17 or 18" wheels, many 17x8 or 18x8 have 4.5" BS, limiting my choices... I'm uncertain if this much BS would work. Once I nail down the wheels will look at tires. I'm running 235-75/R15 now. Have to raise up the coilovers because the tire will hit the fender bolt on big bumps. This picture shows one setting, it's too low, currently raised up a bit. ![]() Thanks for any insights! Roy
__________________
1965 Suburban Waiting on Time and Money |
![]() |
![]() |
![]() |
#2 |
67-72 parts collector,…
![]() Join Date: Nov 2002
Location: Mid-MO
Posts: 22,701
|
Re: Wheel Backspacing With 73-87 Drop Spindles and QA1 Coilovers?
Can you run a 15x7 rally wheel?
They have less backspacing than the 8” wheel. And make sure you don’t get a 15x6.5 van rally. They have the same backspacing as a 15x8.
__________________
Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,890
|
Re: Wheel Backspacing With 73-87 Drop Spindles and QA1 Coilovers?
You could get away with more backspacing on bigger wheels since the diameter pushes the rim away from the LCA.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
Bookmarks |
|
|