Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-18-2024, 02:15 AM | #35 |
Senior Member
Join Date: May 2014
Location: Vancouver, BC
Posts: 591
|
Tailgate
I needed to get a new tailgate and found this one with bullet holes in it and figured what the heck it fits the vibe.
The latch wouldn't work at all but I just needed to take it apart and oil it up and it works great now. I did a totally different faux patina method on the tailgate. I sanded and scrubbed and used solvent to get as much of the black primer off it as I could. I primed the centre section again because it was just too ugly. Then I left the rest without primer and put the toothpaste/coffee mix over any existing real patina that I wanted to keep. Then I sprayed it with the blue and scrubbed and polished it after it was dry. This picture is probably after the scrubbing but before the polishing. And here she is. I like it and it matches the rest of the truck even though my method was a lot different. I got this tailgate and a lot of other parts at Dusty Roads by the way. He's an awesome guy and has a great collection of everything squarebody. Anyone up this way has probably seen him on instagram and marketplace and I encourage you to check him out.
__________________
Kitsbeach (Ken) 1967 C10 LWB (now SWB) Fleetside 6cyl Saginaw three-on-the-tree "No Frills" 1980 C20 Long to short & static drop "Square One" Last edited by kitsbeach; 09-18-2024 at 02:37 AM. |
Bookmarks |
|
|