1962 chevy c10 update.

[62 Barnfind]

Had everything in place. Used a straight edge to mark where it would be flush with the frame rail. Then cut out 7/8 in out and welded together. It hard to do.

[rbruno68]

Thanks. I think I may have seen that in another thread. If I ever do something different with my 62, I think I would rather do this then add the blocks under the mount on top of the frame.
Rob

[62 Barnfind]

Originally Posted by rbruno68

Thanks. I think I may have seen that in another thread. If I ever do something different with my 62, I think I would rather do this then add the blocks under the mount on top of the frame.
Rob

I didn’t like the look so I just modified it.

[Braunschweiger]

A nice structure, I like it very much.

[62 Barnfind]

Attachment 2403979Engine almost complete. Just did the first start and fired right off with 60lbs of oil pressure. Still have a few things to button up like power steering lines and a small exhaust leak. I have the exhaust dumped right now u til I come up way to get it to the rear. I’m open to suggestions.