KS Bed Floor Patch Material

[Ironhorse]

Original bed floor material from a truck I parted some time back. No ribs or bed stiffeners, flat panel sections. No curved, corner or bed end edge sections. No rust or flaking or dented sections, normal topside paint wear and flaking. Best shipped via USPS Flat Rate Priority boxes, if it fits, it ships. Can ship several stacked pieces in one box for one initial shipping cost. Money order payment, do not have Paypal

One section 6'' x 23'' $15 plus shipping

One large section 20'' x 50'' Can cut pieces to your size requirements.

Figure a 12'' x 12'' section at $15 plus shipping. Larger sizes priced accordingly to size required.

[Dan-K]

I will take two of the 6 x 23 sections .

[Ironhorse]

Originally Posted by Dan-K

I will take two of the 6 x 23 sections .

Dan-K, do you want the single piece shown in the pic which has a brace under the floor and another of same size or two single pieces 6 x 23 with no brace material, just the bed floor material itself? Can cut a couple pieces 6 x 23 with no bracing at all, just flat bed floor metal for patches. Let me know your preference, thanks for the interest.

[Ironhorse]

Dan, two 6'' x 23'' sections cut and boxed. PM sent with total to your door and payment info. Thanks for the purchase.

More original bed floor material still available for patching as needed.

[ESC]

I’ll take a 12’’x12’’ section, send me amount

[Ironhorse]

Originally Posted by ESC

I’ll take a 12’’x12’’ section, send me amount

Can get a 12'' x 12'' section cut but will need a zip code to figure a total money order amount with the shipping included. Thanks for the interest, let me know your zip and I will get it cut and figured for shipment.

[Ironhorse]

Originally Posted by Dan-K

I will take two of the 6 x 23 sections .

Dan, payment received and shipped the two bed floor patch sections this morning. PM sent with tracking info numbers. Thanks again for the purchase.

ESC: need a zip code to figure shipping total for a 12'' x 12'' bed floor patch.



Still have bed floor patch material left for bed floor repairs. $15 for 12'' x 12'' plus shipping. Larger pieces are available also.

[ESC]

91911

[Ironhorse]

Originally Posted by ESC

91911

Chula Vista, Cal. Got it, thanks. Will get the patch cut and get a total to your door with shipping included. Thanks for the interest.

Floor patch is cut and sending a PM with money order total to your door and payment info. Thanks for the purchase.

[Ironhorse]

ESC, payment received and shipped the bed floor patch this morning. PM sent with tracking info. Thanks again for the purchase,

[ESC]

Thank you!

[Ironhorse]

Still have original bed floor material available for patches and repairs. $15 plus shipping for a 12'' x 12'' section. Larger pieces available with size equivalent cost. Money order payment, do not have Paypal.