72 Steel bed to Wood ?

[saddletramp]

Evening Guys can someone help me with swaping from steel bed floor to wood I've got the cross sills from MarK and I spoke to a sales person at Bed Wood he told me to find out and let him no where they can drill the holes in the Wood for my 72 GMC Fleetside long bed to bolt down would it be the same pattern from 71or 70 Wood beds Thanks Saddletramp

[Getter-Done]

There is a member doing this.

Let me see if I can find the thread.

Are you going to C10 Nationals tomorrow?

[Getter-Done]

Here's the first thread that came up.

Link: https://67-72chevytrucks.com/vboard/...d+to+steel+bed

[mr48chev]

I've got a too banged around to use 68 long bed fleetside box on a trailer that has a wood bed that has/had a wood bed that is probably only good for parts for a conversion that I would let a member haul off if they needed it. It's sitting on a 70 frame made into a trailer that is the worse towing trailer I ever built.

[Jason Banks]

If you have the Mar-K cross sills, you can install the bed with the bolt heads concealed. You have to rout a recess in the bottom of the boards for the bolt heads, though.

On the Mar-K cross sills there are square holes where the bed bolts go, to capture the square on the carriage bolt. So, you put the bolts in the cross sill and the wood on top. It's a very clean look.

[saddletramp]

Thanks Guys for the response I like that Wood over steel bed but I can't afford that just retired and yes I'm going to the C-10 National,s Sunday I'll be taking alot of Pictures Saddletramp

[LS short box]

Per the pic above I routed some recesses in the bottom of the bed wood.
My 68 project.

[crazyjeenyus]

You'll need to replace or modify the front bed panel. The ones that were used with the wood floor beds are slightly taller than the ones that were used with steel beds due to the extra thickness of the wood compared to steel.