1973 k10 fitech ultimate LS no fuel

[Mike_The_Grad]

Yeah, I've used the borgeson inverted flare adapters for the metric o ring style gear boxes to convert to inverted flare lines when I put power steering on my dads 1964 c10.

I'm using CPP adapter for pressure line to convert inverted flare pressure port on gearbox to metric o ring. The leak is from the inverted flare brass seat inside the gearbox port having a deep ring ridge worn into the sealing surface of the brass seat. I found Lee power steering makes a replacement seat kit with install tool for the different saginaw gearboxes pre-1980 and later. For about $40.

Anyways, I cleaned up both the fitting and seat faces better and reconnected everything. I'm about to fire it up again and see if I was able to fix the leak. Other wise I will be ordering the seat kit from Lee power steering.